topic Uploaded license, rebooted in Wireless

Flexconnect Local Switching with No VLAN Mapping

dot1x — Mon, 05 Jul 2021 14:30:59 GMT

Hi,

I have a quick question.

We have Flexconnect Local Switching with no VLAN mapping on the APs or Flexconnect Group. If APs lose connection to WLC, would the clients get disconnected or stay connected?

The site has no VLANs and it's running on Native VLAN 1.

Already connected clients

Rasika Nayanajith — Wed, 09 Aug 2017 05:19:57 GMT

Already connected clients should remain connected. No new clients able to connect unless local authentication is available.

HTH

Rasika

Thanks Rasika.

dot1x — Wed, 09 Aug 2017 05:25:39 GMT

Thanks Rasika.

There is no WLAN-VLAN Mapping defined in FlexConnect Group.

Neither do we have VLAN Support option Checked on individual APs.

Screenshots attached.

Would that be an issue if the WLC restarts?

I do not think that would be

Rasika Nayanajith — Wed, 09 Aug 2017 05:29:48 GMT

I do not think that would be an issue.

Better if you could test it and verify.

Rasika

Thanks.

dot1x — Wed, 09 Aug 2017 06:08:42 GMT

Thanks.

Actually I've to upload license on controller, the controller will restart after the licenses are uploaded, right?

That's why I wanted to make sure if the clients would still be connected or not.

Uploaded license, rebooted

dot1x — Wed, 09 Aug 2017 07:00:03 GMT

Uploaded license, rebooted the controller.

Everything worked fine, no disconnections to clients or APs.

Good to hear that.

Rasika Nayanajith — Wed, 09 Aug 2017 07:53:53 GMT

Good to hear that.

If you satisfied with responses given, you can mark this thread as "answered"

HTH

Rasika