topic Re: How to check on which APs a wlan profile is activated on WLC in Wireless

How to check on which APs a wlan profile is activated on WLC4402

thorsten.steffen — Sat, 03 Jul 2021 22:41:58 GMT

Hello,

we use a wlc4402 and several wlan profiles which are activated on different access-points (wlan override).

Does anybody know if there is a possibility to see a summary list of the aps on which a certain wlan profile is activated?

Best Regards,

Thorsten

Re: How to check on which APs a wlan profile is activated on WLC

Scott Fella — Thu, 10 Apr 2008 11:31:37 GMT

Don't know if you call it a summary, but if you run a show run-config or show running-config on the wlc cli, the ap information is in one of those. You then can paste that to notepad or word and do a find .

Re: How to check on which APs a wlan profile is activated on WLC

thorsten.steffen — Thu, 10 Apr 2008 12:21:06 GMT

Hello,

I tested it but did not get the output I am looking for.

What I am looking for is a list of all wlan profiles and for each wlan profile a list of all ap where it's activated, e.g.:

wlan profile 1

ap1

ap2

ap3

wlan profile 2

ap2

ap5

ap7

...

Does anybody further know how I can set the cli terminal length to 0 so that there is no page break (as term len 0 in ios)?

Regards,

Thorsten

Re: How to check on which APs a wlan profile is activated on WLC

ericgarnel — Thu, 10 Apr 2008 13:47:09 GMT

If you have WCS, this can be done under the reporting function

Re: How to check on which APs a wlan profile is activated on WLC

Scott Fella — Thu, 10 Apr 2008 14:34:34 GMT

Try config paging enable | disable