topic Re: Configuring LocalNet Users in Wireless

Configuring LocalNet Users

Rob Johnson — Mon, 05 Jul 2021 07:09:24 GMT

In the link below I see where there is a 24 character limit for localnet users. However, the only time you get an error when trying to add a user(s) w/ more than 24 characters is from the CLI(the GUI doesn't give an error)

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_0101111.html

Questions::

1) What authentication type(s) can be used on the WLAN to use these localnet users? LEAP, EAP Fast.... what else?

2) If from the GUI a localnet username with more than 24 characters is used, can it login?

Re: Configuring LocalNet Users

Scott Fella — Wed, 12 Feb 2014 00:21:53 GMT

Rob,

You can use the local net user for WebAuth also. It also fails if you create a password larger than 24. I tried it with a password of 30 characters.

Sent from Cisco Technical Support iPhone App

Re: Configuring LocalNet Users

Rob Johnson — Wed, 12 Feb 2014 01:03:40 GMT

Scott,

Please try if you will to create a user with more than 24 characters via the GUI then try to login using that ID.

For me, if I was doing my Webauth correct today, it worked!!! which is totally messed up::::

Configuring LocalNet Users

Scott Fella — Wed, 12 Feb 2014 01:55:06 GMT

I just tried it again... 24 and under works, anything over 24, I get a login error.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

Re: Configuring LocalNet Users

Rob Johnson — Wed, 12 Feb 2014 04:51:27 GMT

Thanks Scott,

What version of code was your WLC running?

Re: Configuring LocalNet Users

Scott Fella — Wed, 12 Feb 2014 05:09:01 GMT

Running the TAC release v7.6.100.4

Sent from Cisco Technical Support iPhone App