topic Site survey in Wireless https://community.cisco.com/t5/wireless/site-survey/m-p/1810771#M163199 <HTML><HEAD></HEAD><BODY><P> If the specs are exaclty the same, then you could reasonably expect it to have the same coverage.&nbsp; But YMMV.&nbsp; My recommendation would be to survey with the type of AP both vendor and model, that you are wanting to implement.</P><P></P><P>HTH,<BR />Steve</P></BODY></HTML> Mon, 09 Jan 2012 17:03:02 GMT Stephen Rodriguez 2012-01-09T17:03:02Z Site survey https://community.cisco.com/t5/wireless/site-survey/m-p/1810770#M163198 <P>Hello,</P><P></P><P>I would like to know if I perform the site survey with a non-Cisco AP and software then I install a Cisco AP (with the same specs as the AP that I did site survey, as rx and tx power), will the result be different or I should have more or less the same result?</P><P></P><P>Thanks,</P><P>Mehdi</P> Sun, 04 Jul 2021 04:20:51 GMT https://community.cisco.com/t5/wireless/site-survey/m-p/1810770#M163198 Mehdi Talei 2021-07-04T04:20:51Z Site survey https://community.cisco.com/t5/wireless/site-survey/m-p/1810771#M163199 <HTML><HEAD></HEAD><BODY><P> If the specs are exaclty the same, then you could reasonably expect it to have the same coverage.&nbsp; But YMMV.&nbsp; My recommendation would be to survey with the type of AP both vendor and model, that you are wanting to implement.</P><P></P><P>HTH,<BR />Steve</P></BODY></HTML> Mon, 09 Jan 2012 17:03:02 GMT https://community.cisco.com/t5/wireless/site-survey/m-p/1810771#M163199 Stephen Rodriguez 2012-01-09T17:03:02Z