topic 7.6.130.0 I have a feeling it in Wireless

Coverage Hole Detection & RF Profiles

Nick Lavender — Mon, 05 Jul 2021 08:26:08 GMT

Hi Guys,

I've recently started to deploy RF profiles on various sites based on different data rate requirements. I know before the days of RF Profiles that Coverage Hole Detection (CHD) was enabled on the WLAN.

My query is, now that RF profiles exists, can you disable CHD on a specific WLAN and enable it on an RF profile or does it have to be enabled on both for it to function?

Cheers,

What version of code are you

Thomas McClintic — Wed, 27 Aug 2014 18:27:58 GMT

What version of code are you running?

7.6.130.0 I have a feeling it

Nick Lavender — Tue, 02 Sep 2014 08:03:41 GMT

7.6.130.0

I have a feeling it needs to be enabled globally on the WLAN and then it can be "tweaked" using the profile configuration.

I still need to play with 8.0

Thomas McClintic — Tue, 02 Sep 2014 12:26:18 GMT

I still need to play with 8.0, that is why I was asking because I am not sure on that version. What I gather from the documentation it is the same... http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_01011101.html

However, with 7.6 you will need to have it enabled on the WLAN as there is no way to 're-enable' it on the RF Profile. You could tweak it to not be kicked off often though