topic Re: Auto-RF in Wireless

Auto-RF

svanhandel — Sat, 03 Jul 2021 20:26:37 GMT

I have a question regarding Auto-RF with the Cisco Controllers.

1. Does Auto-RF require a specific number of AP's to function correctly? 4 AP's minimum is what I have heard.

Thanks!

Sean.

Re: Auto-RF

Benjamin Solero — Thu, 04 Jan 2007 21:29:23 GMT

Hi Sean,

The Transmit Power Control (TPC) Algorithm (used in Radio Resource Management or auto-rf) adjusts an APs transmit power down when the third loudest neighbor is heard at -65dBm (default value) or greater. That's likely where you got the minimum number.

There's much more to RRM than TPC. For an in-depth and well-written explanation of RRM, please read the document at the following URL:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072c759.shtml

Best Regards,

Ben

Re: Auto-RF

Rob Huffman — Thu, 04 Jan 2007 21:56:28 GMT

Hi Sean,

Just to add a note to Ben's always excellent info. This parameter may have been the one that you heard of.

Power Neighbor Count (3) - The minimum number of neighbors an AP must have for the TPC algorithm to run. This is a display-only field and cannot be modified.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072c759.shtml#group_algorithm

Take care guys!

Rob