topic Re: RF reception and coverage concepts in Wireless https://community.cisco.com/t5/wireless/rf-reception-and-coverage-concepts/m-p/435811#M163776 <HTML><HEAD></HEAD><BODY><P>The electromagnetic waves generated by the transmitter must reach the receiving antenna (and the signal strength must be high enough above the noise floor for the receiver to be able to discriminate the information coded into the signal).</P><P></P><P>Good Luck</P><P></P><P>Scott</P><P></P></BODY></HTML> Mon, 26 Sep 2005 20:02:06 GMT scottmac 2005-09-26T20:02:06Z RF reception and coverage concepts https://community.cisco.com/t5/wireless/rf-reception-and-coverage-concepts/m-p/435810#M163775 <P>Is wireless connectivity obtained at the point where two signals meet or must the signal actually reach the recieving antenna?</P> Sun, 04 Jul 2021 18:09:54 GMT https://community.cisco.com/t5/wireless/rf-reception-and-coverage-concepts/m-p/435810#M163775 rpellston 2021-07-04T18:09:54Z Re: RF reception and coverage concepts https://community.cisco.com/t5/wireless/rf-reception-and-coverage-concepts/m-p/435811#M163776 <HTML><HEAD></HEAD><BODY><P>The electromagnetic waves generated by the transmitter must reach the receiving antenna (and the signal strength must be high enough above the noise floor for the receiver to be able to discriminate the information coded into the signal).</P><P></P><P>Good Luck</P><P></P><P>Scott</P><P></P></BODY></HTML> Mon, 26 Sep 2005 20:02:06 GMT https://community.cisco.com/t5/wireless/rf-reception-and-coverage-concepts/m-p/435811#M163776 scottmac 2005-09-26T20:02:06Z