vlan concern

yogesh1 — Mon, 05 Jul 2021 14:53:22 GMT

HI Everyone,

If we have configured two vlan 50, 51 both with d/f ip range as mention below in core switch

interface Vlan50
ip address 10.85.49.1 255.255.255.0
no ip redirects
no ip unreachables
end

nterface Vlan51
ip address 10.85.93.128 255.255.255.128
no ip redirects
no ip unreachables
end

and we already pass vlan 50 in our access layer switch where system already getting ip so if we also pass vlan 51 in that switch like switchport access allowed vlan 51 so in that case end system is getting ip from which range please let me know..?

Re: vlan concern

Flavio Miranda — Sat, 18 Nov 2017 21:05:51 GMT

Hi @yogesh1

Not sure if I understood but if this two vlan were extended to the WLC, assuming you are talking about that, then, you can create a interface group, put those two vlans and WLC will allow clients get IP from two vlans.

If you are not talking about a PC then either it uses one or other as it has only one dhcp server option.

-If I helped you somehow, please, rate it as useful.-

topic Re: vlan concern in Wireless

vlan concern

Re: vlan concern