topic Re: AP Authorisation on 4402 in Wireless https://community.cisco.com/t5/wireless/ap-authorisation-on-4402/m-p/734023#M16390 <HTML><HEAD></HEAD><BODY><P>When you enable ap authorization it sends the request to the Radius server, not the internal MIC entries. Just add the AP to the Radius server as a client using the mac-address as the username and password.</P></BODY></HTML> Fri, 24 Aug 2007 23:59:23 GMT dancampb 2007-08-24T23:59:23Z AP Authorisation on 4402 https://community.cisco.com/t5/wireless/ap-authorisation-on-4402/m-p/734022#M16389 <P>Hi</P><P></P><P>Am I doing something wrong?</P><P></P><P>I am trying to get the AP's to be authorised by the controller.</P><P></P><P>I have added a MIC entry for the AP with its 'Base Radio MAC', and then turned on Authorize AP's Against AAA, but as soon as I do that, I reboot the AP's and they do no connect, with no error on the controller to say they are rejected.</P><P></P><P>I am not using an external AAA Server, just the local MIC list.</P><P></P><P>Any ideas?</P><P></P><P>David</P> Sat, 03 Jul 2021 21:32:08 GMT https://community.cisco.com/t5/wireless/ap-authorisation-on-4402/m-p/734022#M16389 dazzo 2021-07-03T21:32:08Z Re: AP Authorisation on 4402 https://community.cisco.com/t5/wireless/ap-authorisation-on-4402/m-p/734023#M16390 <HTML><HEAD></HEAD><BODY><P>When you enable ap authorization it sends the request to the Radius server, not the internal MIC entries. Just add the AP to the Radius server as a client using the mac-address as the username and password.</P></BODY></HTML> Fri, 24 Aug 2007 23:59:23 GMT https://community.cisco.com/t5/wireless/ap-authorisation-on-4402/m-p/734023#M16390 dancampb 2007-08-24T23:59:23Z