topic Re:How to enable aggressive client loadbalancing in Wireless

How to enable aggressive client loadbalancing

Angus Bishop — Mon, 05 Jul 2021 07:20:42 GMT

Hi experts

Can you please tell me how to enable aggressive client load balancing on cisco 5760 controller .

I am not able to find any doc to enable this on ios controllers

Thanks in advance
Angus
Sent from Cisco Technical Support Android App

How to enable aggressive client loadbalancing

Ashish Chandra — Wed, 05 Mar 2014 16:49:25 GMT

Hi Angus,

PFB link for the same.

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/113160-aggressive-load-balancing-clients-00.html#config

Thanks

Ashish

Re:How to enable aggressive client loadbalancing

Angus Bishop — Wed, 05 Mar 2014 18:07:58 GMT

Hi ashish

Thanks for the fast reply

The link says enabling on the 4400 controllers where as I am looking for the configuration on 5760 ios series controller.

Please hel me in getting the config for ios 3.3.1 wlan controller

Sent from Cisco Technical Support Android App

Re:How to enable aggressive client loadbalancing

Ashish Chandra — Wed, 05 Mar 2014 18:41:35 GMT

Hi Angus,

Please have a look at the link below.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/5700/software/release/3se/consolidated_guide/configuration_guide/b_multi_3se_5700_cg/b_multi_3se_5700_cg_chapter_0110000.html

try this as well

http://www.cisco.com/c/en/us/td/docs/wireless/controller/5700/software/release/3se/consolidated_guide/configuration_guide/b_multi_3se_5700_cg.pdf

Thanks,

Ashish