topic What I'm trying to get around in Wireless

Guest network NAT mode

Mark Dayton — Mon, 05 Jul 2021 13:09:58 GMT

Hi,

Please can someone tell me if it's possible to setup a Guest SSID in NAT mode (similar to the Meraki feature) without having to use VLAN tagging etc...

Thanks

Sorry just to add, hardware

Mark Dayton — Fri, 25 Nov 2016 14:51:30 GMT

Sorry just to add, hardware WLC 5508 and 1602i AP's, site routers 887VA's

Mark,

Scott Fella — Fri, 25 Nov 2016 15:10:41 GMT

Mark,

The Cisco controllers do not support NAT and thus you will have to create a desperate vlan and tag guest traffic.

-Scott

*** Please rate helpful posts ***

What I'm trying to get around

Mark Dayton — Fri, 25 Nov 2016 15:32:14 GMT

What I'm trying to get around is having to advertise another network from our MPLS router.

Would I being able to create another vlan on the router, tag this for the guest SSID and NAT this through the advertised default gateway?

Yes... that is what you would

Scott Fella — Fri, 25 Nov 2016 16:18:07 GMT

Yes... that is what you would have to do. Your router will have to perform the NAT.

-Scott

*** Please rate helpful posts ***