topic Optimized Roam in Wireless

Optimized Roam

Flavio Miranda — Mon, 05 Jul 2021 14:28:55 GMT

Hello fellows,

I´ve trying to take advantage of the feature Optimized roaming in a outdoor environment using a WLC 8.0. My clients is receiving the following messages:

Optimized Roaming : Client RSSI(-91) is lower than the association RSSI threshold(-74)

Trying to figure it out where does -74 comes from. considering "Data Rates" is disabled, WLC should look at "Data RSSI" on CHD, which, in my case, is -89 dBm.

Anyone?

May be WLC still use default

Rasika Nayanajith — Wed, 02 Aug 2017 23:25:14 GMT

May be WLC still use default Data RSSI value of -80dBm (-74 is 6dB better than the threshold)

Refer below

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/hdx_final/b_hdx_dg_final/high_density_experience_features_added_in_release_8_0.html

HTH

Rasika
*** Pls rate all useful responses ***

Yeah...I´ll confirm this by

Flavio Miranda — Thu, 03 Aug 2017 00:04:57 GMT

Yeah...I´ll confirm this by tomorrow, but, that´s was my suspicious as well. Interesting that I was expecting the WLC to look at RF profile, considering it is there. If you´re right, this means that, Coverage under 802.11a/b is where it looks to take decision.

Thanks in advanced.