topic Roaming Doubt in Wireless

Roaming Doubt

roycemathew — Mon, 05 Jul 2021 07:14:33 GMT

hi All,

I have a doubt on how roaming works.

I have AP's and AP Groups

2 WLC

All Access points associated to same WLC

AP Group 1 - Subnet A - VLAN 1

AP Group 2 - Subnet b - vlan 2

Now if a user roams from APGroup 1 --> APG2 , means in diff subnet. What will happen with the user roaming. Whether user is going to get a new IP or going to retain the same because they are in the same WLC.

PLease clarify

Roaming Doubt

Scott Fella — Thu, 20 Feb 2014 16:52:57 GMT

User will retain their ip address and this is considered layer 3 roaming. This works fine if the AP's are in local mode, but in flexconnect, the user will drop and have to re-associate and get a new ip address.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

Roaming Doubt

roycemathew — Thu, 20 Feb 2014 17:34:53 GMT

so if the access points are associated to same or diff WLC it performs L3 roaming right and at no point user experiences any disruption.

Roaming Doubt

Scott Fella — Thu, 20 Feb 2014 17:36:09 GMT

As long as the user doens't loose wirless signal, then yes, this is seamless layer 3 roaming. FlexConnect is different though.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****