topic Multicast wlc5508 in Wireless

Multicast wlc5508

robertssean — Sun, 04 Jul 2021 07:20:54 GMT

Hi,

Has anybody had any issues setting up multicast on the wireless network with a certain fruit based tv?
We are trying to implement this but have nit managed to get it working, all enabled on the wlc ip address of 239.255.255.1 & everythjng enabled on the switch vlan & ip multicasting routing enabled globally, bjt still the icon does not appear on the tablet device. Have read the latest doc on setting this up but not too sure what i am doing wrong?

Cheers

Sean

Sent from Cisco Technical Support Android App

Multicast wlc5508

kcnajaf — Thu, 04 Jul 2013 08:07:03 GMT

Hi Robert,

I like the term fruit based TV 🙂

Please check below link

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0080bb1d7c.shtml

http://www.cisco.com/en/US/docs/wireless/technology/bonjour/Bonjour_Deployment.html

Hope that helps.

Regards

Najaf

Please rate when applicable or helpful !!!

Re: Multicast wlc5508

Scott Fella — Thu, 04 Jul 2013 12:57:35 GMT

What code are you running on the WLC. Also are you seeing any multicast trading on the switch? Are these fruit TV's wireless or wired and are you trying to cross a layer 3 boundary?

Sent from Cisco Technical Support iPhone App

Re: Multicast wlc5508

robertssean — Thu, 04 Jul 2013 14:01:06 GMT

Hi,

I am running

7.0.116.0 on the wlc 5508, my fruit based tv is wireless

Multicast wlc5508

M.Netuschil5148 — Thu, 04 Jul 2013 14:15:07 GMT

Hi Robertssean,

with this code you can manage the apple TV when the clients and the TV are in the same VLAN!

we have tested this exactly:

AppleTV Client Multicast global Multicast-Mode

WLAN WLAN enable Multicast or Unicast IP 239.1.1.10 for example

LAN WLAN enable Multicast or Unicast IP 239.1.1.10 for example

Router Config Status

nothing Running

I hope that helps!

Regards,

Mario

Multicast wlc5508

robertssean — Thu, 04 Jul 2013 14:22:33 GMT

Hi,

Our setup we have is, we have a anchor controller that has a guest-wlan of 100 & then a normal 5508 behind that which has vlan 203, in between we have a cisco switch that does not have ip multicast enabled or ip pim sparse enabled, do we have to have this configured? we have managed to get it working locally over a standard linksys ap with IPAD one side & apple tv the pther & was able to get that working all ok, its just wehn we try over the wireless network it does not work & it is very frustrating but something obvious.

Cheers

Sean

Re: Multicast wlc5508

M.Netuschil5148 — Thu, 04 Jul 2013 14:30:18 GMT

Hi,

are the clients and the apple tv in the same VLAN ID?

If this not you need a Version 7.4 with the apple bonjour gateway, but this version is in my opinion not stable.

Regards,

Mario

Re: Multicast wlc5508

Scott Fella — Thu, 04 Jul 2013 16:04:21 GMT

I don't think that multicast is supported when anchoring to be honest.

Sent from Cisco Technical Support iPhone App