topic 1572EAC-M Power level issue in Wireless

1572EAC-M Power level issue

yahya.jaber — Mon, 05 Jul 2021 12:54:05 GMT

WLC 8500 with 8.0.120.0

I installed one 1572EAC-M AP on power injector.

When I check the power level allowed it's only 3 levels "16, 13, and 10"

The WLC "show country channels support tx-power" it allowes me to use 27dbm on certain channels, why can't I see those?

My country is SA

Thanks.

Rasika Nayanajith — Thu, 29 Sep 2016 05:16:43 GMT

check your regulatory domain restrictions on both 2.4GHz and 5GHz bands.

If regulatory domain allows higher power level for the frequency band AP operate, then it could be a software issue of the 8.0.x code as well.

Refer this thread on similar issue but with different AP model

HTH

Rasika

*** Pls rate all useful responses ***

yahya.jaber — Thu, 29 Sep 2016 06:29:20 GMT

my WLC says

show country supported tx-power

27*27*27*27*27*27*27*27*27*27*27*16*16*16*16*

from channel 100 till 161 and my AP channel is 100 80Mhz

i have 3702 AP's and they are having the correct power level.