topic 350 WGB detected as Repeater not Bridge in Wireless https://community.cisco.com/t5/wireless/350-wgb-detected-as-repeater-not-bridge/m-p/386021#M166995 <P>A recently purchased 1200AP shows a 350WGB as a repeater and not a bridge in the logs. Is this normal behaviour ? Also for a noobie like me, whats the difference between IOS and VXworks ?</P> Sun, 04 Jul 2021 17:15:53 GMT darwinpcdr 2021-07-04T17:15:53Z 350 WGB detected as Repeater not Bridge https://community.cisco.com/t5/wireless/350-wgb-detected-as-repeater-not-bridge/m-p/386021#M166995 <P>A recently purchased 1200AP shows a 350WGB as a repeater and not a bridge in the logs. Is this normal behaviour ? Also for a noobie like me, whats the difference between IOS and VXworks ?</P> Sun, 04 Jul 2021 17:15:53 GMT https://community.cisco.com/t5/wireless/350-wgb-detected-as-repeater-not-bridge/m-p/386021#M166995 darwinpcdr 2021-07-04T17:15:53Z Re: 350 WGB detected as Repeater not Bridge https://community.cisco.com/t5/wireless/350-wgb-detected-as-repeater-not-bridge/m-p/386022#M166996 <HTML><HEAD></HEAD><BODY><P>What are the software version of AP1200 and 350WGB.</P><P></P><P>When Cisco acquired Aironet (the company), all Aironet product were running VxWorks (an development tool). Then, Cisco made a decision to convert all Aironet product from VxWorks to IOS (i.e. the operating system running on other Cisco routers and switches). So far, only AP1200 and AP350 are converted from VxWorks to IOS.</P></BODY></HTML> Fri, 17 Dec 2004 23:19:34 GMT https://community.cisco.com/t5/wireless/350-wgb-detected-as-repeater-not-bridge/m-p/386022#M166996 dixho 2004-12-17T23:19:34Z