topic Re: Bridge 1300 not local radius server ? in Wireless

Bridge 1300 not local radius server ?

nrousseau — Sun, 04 Jul 2021 17:13:35 GMT

Hello,

I would like to use a 1300 Bridge in AP mode. I didn't found in web administration interface any menu about local radius server like you can found in AP1100 menu.

Does that mean this 1300 Bridge haven't local radius server possibilities ?

Thanks for help.

Re: Bridge 1300 not local radius server ?

cisco — Thu, 02 Dec 2004 20:49:38 GMT

YUP - Cisco documentation for using an external Radius server (FreeRadius) is rather hard to find.

I have some Cisco 1310 APs I would like configure to use FreeRadius. I am just about at the point to consider selecting another brand of APs just because of the lack of good and full Cisco documents for 3rd party Radius server support.

If Cisco has them on their web site, beats me where they are.

Re: Bridge 1300 not local radius server ?

dixho — Sat, 04 Dec 2004 01:34:20 GMT

12.2(15)JA does not support local radius server. Local radius server is added in 12.3(2)JA. Please click on "SECURITY" in the http interface. You should have an item called "Local RADIUS Server" in 12.3(2)JA software.

Re: Bridge 1300 not local radius server ?

nrousseau — Mon, 06 Dec 2004 14:22:11 GMT

oh great, i will check my version and let you know, thanks

Re: Bridge 1300 not local radius server ?

nrousseau — Wed, 08 Dec 2004 13:38:01 GMT

Thanks dixho for your answer but it seems that 1300 Bridges series doesn't support 12.3(2)JA IOS release.

Any hope for future support of this IOS or another version with Local Radius ?

Re: Bridge 1300 not local radius server ?

dixho — Wed, 08 Dec 2004 19:43:36 GMT

why do you say that 1300 bridges doesn't support 12.3(2)JA. You do not download the 12.3 software on the usual place. (i.e. "Wireless Software" or "Aironet Wireless Software Selector" in "Download" page in www.cisco.com. You need to click on "Cisco IOS Software" in the "Download" page.

Please try the following URL:

http://www.cisco.com/cgi-bin/Software/Iosplanner/Planner-tool/iosresult.cgi?get_crypto=&data_from=&hardware_name=1310WIRELESSBRIDGE&software_name=WIRELESS%20LAN&release_name=12.3.2-JA&majorRel=12.3&state=:HW:RL:SW&type=Early%20Deployment

As I may use a different link for software download, the above URL does not work. Please tell me how you download the software for 1310.