topic Re: RSSI LED Indications in Wireless https://community.cisco.com/t5/wireless/rssi-led-indications/m-p/491567#M167582 <HTML><HEAD></HEAD><BODY><P>If you want to bridge between these two, configure one as root, and other as non-root. On the non-root you wont have to set much paramters other than SSID and WEP. Pretty much every thing else will be negotiated from the root bridge.</P></BODY></HTML> Fri, 14 Oct 2005 03:40:42 GMT thisisshanky 2005-10-14T03:40:42Z RSSI LED Indications https://community.cisco.com/t5/wireless/rssi-led-indications/m-p/491566#M167581 <P>Hi!</P><P></P><P>I have two Cisco Aironet 1300, and i want to use the RSSI, my cuestion is..</P><P></P><P>i need configure two bridges in Install-mode, or only one in instal-mode and the other in root mode?</P><P></P><P>thanks</P> Sun, 04 Jul 2021 18:12:37 GMT https://community.cisco.com/t5/wireless/rssi-led-indications/m-p/491566#M167581 amunoz 2021-07-04T18:12:37Z Re: RSSI LED Indications https://community.cisco.com/t5/wireless/rssi-led-indications/m-p/491567#M167582 <HTML><HEAD></HEAD><BODY><P>If you want to bridge between these two, configure one as root, and other as non-root. On the non-root you wont have to set much paramters other than SSID and WEP. Pretty much every thing else will be negotiated from the root bridge.</P></BODY></HTML> Fri, 14 Oct 2005 03:40:42 GMT https://community.cisco.com/t5/wireless/rssi-led-indications/m-p/491567#M167582 thisisshanky 2005-10-14T03:40:42Z