topic DCA Channel not shown in Wireless

DCA Channel not shown

mimidi209 — Sun, 04 Jul 2021 03:45:08 GMT

My default country code was US and I can't choose DCA channels, I change county code to United States(DCA) but still I can't choose DCA channel, only 149-165 channels shown in "RF Backhaul Channel Assignment". We have WLC 4402 release 4.2.176.51M Mesh and 1510 LWAP

DCA Channel not shown

George Stefanick — Sun, 11 Sep 2011 14:25:50 GMT

The 1510 doesnt support 802.11h until 6.x code..

Dynamic Channel Assignment (DCA) was not connected to the mesh world until release 6.0. However, with release 7.0, there is a connect between the DCA list and serial backhaul MAPs, only if someone uses (enables) this feature.

I found this here:

http://webcache.googleusercontent.com/search?q=cache:DfK2kxarYRIJ:www.cisco.com/en/US/products/ps6366/products_white_paper09186a0080b34501.shtml+cisco+1520+ap+DCA&cd=1&hl=en&ct=clnk&gl=us

DCA Channel not shown

mimidi209 — Mon, 12 Sep 2011 04:21:26 GMT

Thanks, but how I can using more channels on 5.8GHz backhaul with this release, I choose another country code and nothing changed

DCA Channel not shown

George Stefanick — Mon, 12 Sep 2011 16:08:07 GMT

i think you can only do UNII3 ... Perhaps someone else can comment on this ...