topic 3802e upgrade Errors in Wireless

3802e upgrade Errors

Christopher Rosing — Mon, 05 Jul 2021 19:24:40 GMT

I have a Cisco 3802E running 8.2.151.0 I wan to upgrade it to AIR-AP3800-K9-ME-8-10-130-0.

AP Running Image : 8.2.151.0
Primary Boot Image : 8.2.151.0
Backup Boot Image : 0.0.0.0
1 Multigigabit Ethernet interfaces
1 Gigabit Ethernet interfaces
2 802.11 Radios
Radio Driver version : 9.0.5.5-W8964
Radio FW version : 9.1.8.1
NSS FW version :

I have tried the following commands with the same result:

ap-type mobility-express tftp://192.168.255.209/AIR-AP3800-K9-ME-8-10-121-0.tar

archive download-sw /no-reload tftp://192.168.255.209/AIR-AP3800-K9-ME-8-10-121-0.tar

When it boots, it throws and error about imaging signing, then boots the original image.

Checking image signing.
Image signing verification failure(-2), not allowed to run...
Trying alternate partition part1
UBIFS: mounted UBI device 0, volume 0, name "part1"
Loading file 'part1/part.bin' to addr 0x02000000 with size 18653031 (0x011c9f67)...
Done

Re: 3802e upgrade Errors

patoberli — Tue, 18 Aug 2020 15:18:37 GMT

I think that upgrade path is not allowed. Upgrade first to 8.5.161.0 and then to 8.8.130.0 and lastly to 8.10.130.0 (out of my head).

Re: 3802e upgrade Errors

Rich R — Thu, 20 Aug 2020 11:41:05 GMT

Yes it is very clearly stated in the ME instructions: https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/810/user_guide/b_ME_User_Guide_810/appendix.html although that is also bit out of date (still refers to 8.3)
If you face issues with converting the AP software to a Cisco Mobility Express software, upgrade the AP CAPWAP software to the latest AP software version ap3g3-k9w8-tar.153-3.JD.tar. Now, you can convert the CAPWAP software to the Cisco Mobility Express software AIR-AP2800-K9-ME-8-3-102-0.tar.
So get the AP onto the latest equivalent CAPWAP image and then try the conversion to ME.