Wireless WLC Mesh Sectors

TH09 — Mon, 05 Jul 2021 18:16:38 GMT

Hi there,

When I do "show mesh ap tree", I understand the tree but dont understand what are sectors and why are APs in different sectors? What do sectors tell us?

(Cisco Controller) >show mesh ap tree

===============================================================================
AP Name [Hop Counter, Link SNR, Bridge Group Name, Channel, Preferred Parent]
===============================================================================

[Sector 1]
----------
MAP17(RAP)[0,0,default,149,None]

[Sector 3]
----------
6c8bd3edf71c **
|-MAP03[1,22,default,149,None]

Thanks

Re: Wireless WLC Mesh Sectors

Scott Fella — Fri, 08 Nov 2019 12:24:05 GMT

Look at the hop number. You have 1 RAP and each sectors connect back to that RAP. Then you have multiple MAP’s that connect back to a MAP in sector 2. The hop count will show you if it’s a direct connection to your RAP or how many hops away from the RAP.

topic Re: Wireless WLC Mesh Sectors in Wireless

Wireless WLC Mesh Sectors

Re: Wireless WLC Mesh Sectors