topic Re: Rogue AP? in Wireless

Rogue AP?

richkrissi — Sun, 04 Jul 2021 17:00:55 GMT

I currently have 3 or 4 1200 APs showing a mac address of 00:00:00:00:00:00 ...log states a possible rogue. There is no data packets transfering. The AP states it is unauthenticated. Firmware is VXWorks 12.04.

I have used Airmagnet to see if I could detect anything in our medical building. Nothing. I have recently upgraded two 1200 aps with the G card. In order to run G, I had to upgrade to Cisco IOS firmware. Would it be possible for one AP (VXworks) to have a conflict with another 1200 AP (Cisco IOS)?

I do not get this error with Cisco IOS AP.

Re: Rogue AP?

amisu — Thu, 23 Sep 2004 06:59:11 GMT

this is a known bug

http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsa32966

there is no solution yet.

Re: Rogue AP?

richkrissi — Thu, 23 Sep 2004 14:30:59 GMT

Thank you for the response. I am not using WLSE however... would this still be a problem with VXWorks firmware?

Re: Rogue AP?

rmushtaq — Thu, 23 Sep 2004 17:09:56 GMT

It is an issue with the AP firmware itself. See CSCef25465

Re: Rogue AP?

richkrissi — Thu, 23 Sep 2004 19:56:54 GMT

Thank you very much for your help in this matter!