topic Re: Is there any command to check wlc power supply serial number ? in Wireless

Is there any command to check wlc power supply serial number ?

Rps-Cheers — Mon, 05 Jul 2021 17:48:41 GMT

Hi,

I want to check wlc5508 power supply serial nummer,but we only can check the power supply status by "show inventory" or "show sysinfo" command.

Is there any command to check the power supply serial number on CLI or GUI ?

Thanks

Haydn Andrews — Mon, 05 Aug 2019 22:47:11 GMT

Not sure if this will work but it will get the SFP details which are not seen via the show inventory

show inventory raw

debug fastpath cfgtool --dump.sfp

reference:

Rps-Cheers — Tue, 06 Aug 2019 00:19:23 GMT

HI Haydn

There is no "show inventory raw " command.
I think this mothd is not avaliable,because i have found this link to try.

patoberli — Tue, 06 Aug 2019 08:25:26 GMT

Then the only variant is to pull it out. If you have two, then this should work without an interruption.

HaifengLi — Tue, 06 Aug 2019 12:44:52 GMT

Hi,

It is not possible to find out the power supply serial number through the WLC or via SNMP.

Best regards,

Haifeng

patoberli — Tue, 06 Aug 2019 13:14:00 GMT

If the previous commands don't show it, then probably not.

Rps-Cheers — Tue, 06 Aug 2019 13:25:55 GMT

Thanks for your reply, i also think so...

Rps-Cheers — Tue, 06 Aug 2019 13:26:24 GMT

Hi Haifeng

Thanks for your response,i got it.

Rps-Cheers — Tue, 06 Aug 2019 13:28:26 GMT

But,Is there any way to check the power supply serial number except for the wlc and snmp method ?

patoberli — Tue, 06 Aug 2019 13:44:00 GMT

Yes, it should be printet on a label on the PSU. For this you have to remove it and check the label.

Rps-Cheers — Tue, 06 Aug 2019 13:45:29 GMT

Ok, it seems that this is the only way