topic AIR-AP2802I-E-K9 Factory Reset in Wireless

AIR-AP2802I-E-K9 Factory Reset

danielryan172 — Mon, 05 Jul 2021 17:34:26 GMT

I brought a used AIR-AP2802I-E-K9, I plugged it in and it didn't work so i purchased a power injector. I have now got it to power up. After it finished its little boot the leds flash green red and blue constantly. The SSID isn't visible. Could this be reset to factory settings?

Thanks in advance

Re: AIR-AP2802I-E-K9 Factory Reset

Scott Fella — Mon, 17 Jun 2019 15:24:26 GMT

Here is a document that goes over the led status: https://www.cisco.com/c/en/us/td/docs/wireless/access_point/2800/quick/guide/ap2800iegetstart.html#pgfId-69305

What you should do is console into the ap and see what the output is showing you.

Re: AIR-AP2802I-E-K9 Factory Reset

Scott Fella — Mon, 17 Jun 2019 16:23:23 GMT

Just to add, since you bought it used, you don't know if the image is for Mobility Express or if its lightweight in which you need a WLC. The problem with getting a used AP is that you will not be able to download an image which you might need unless you already have a support contact that allows you to download.

Re: AIR-AP2802I-E-K9 Factory Reset

Leo Laohoo — Tue, 18 Jun 2019 07:53:59 GMT

As what Scott said, I suspect the AP is loaded with CAPWAP image.