topic Re: PI 3.4 Device addition error in Wireless

PI 3.4 Device addition error

AK002 — Mon, 05 Jul 2021 16:55:17 GMT

Hi All,

We are facing issue with PI 3.4 update 2 with dp 9, if we try to add 3650 CG switch getting an error 'device creation failed. IP address is not unique, Address exist as an interface.But when we search in the PI there is no result.

does anyone face this issue in PI 3.4 and got any findings.

Regards,

Re: PI 3.4 Device addition error

Mark Elsen — Fri, 22 Feb 2019 10:33:14 GMT

- Is the address accidentally used as a network-interface-address of the Prime server itself ?

Re: PI 3.4 Device addition error

AK002 — Fri, 22 Feb 2019 15:03:51 GMT

Hi Marc,

No its different IP segment altogether,

we tried to add that switch first time it was added without any error, but after sometimes we can see that device was not there in PI and if we try to search the management IP address its showing the error.

Re: PI 3.4 Device addition error

patoberli — Fri, 22 Feb 2019 15:30:45 GMT

Sounds like it's still in the database, but not visible to you.
Open a TAC, they are probably the only ones who can fix it.

Re: PI 3.4 Device addition error

AK002 — Mon, 25 Feb 2019 11:39:26 GMT

Hi,

If anyone faced this issue before and found any solution then it will be helpful..

Regards,

Re: PI 3.4 Device addition error

Scott Fella — Mon, 25 Feb 2019 14:45:26 GMT

If you have made sure that no other device has that interface ip defined then it might be an entry that is stale in the db. I have had TAC go in and delete the stale entry in the db for me to add the device successfully. Open a TAC case as they will run queries on the db to decide what they need to do.