topic Re: C2960-X POE Switch in Wireless

C2960-X POE Switch

Munavirc@94 — Mon, 05 Jul 2021 16:49:34 GMT

Hi All,

Here i have an 48 Port C2960-X PoE.I connect the PBX's, and 3 Aruba AP's.

But the the problem is Aruba AP couldn't get the exact power,It works under power save mode.

I have a question , Why this PoE can't supply the exact power for the Access points ?

Appreciate the fast replays.

Re: C2960-X POE Switch

Mark Elsen — Mon, 11 Feb 2019 09:15:41 GMT

- Connect the AP , and after a while (5 mins) , issue show logging on the switch , you will then probably get additional info, as to why (exact) power cannot be provided.

Re: C2960-X POE Switch

Haydn Andrews — Mon, 11 Feb 2019 09:27:42 GMT

What are the requirements of the Aruba APs. What Model are they?

Try enabling LLDP if not already enabled: lldp run

Can you share a show power inline from the switch and show run interface <interface AP connected>

Do you see any error on the APs?

Re: C2960-X POE Switch

Jurgens L — Mon, 11 Feb 2019 09:29:18 GMT

Cisco uses CDP for it’s access points, for the Aruba enable LLDP on the switch and see if this will resolve your problem. Otherwise you can set a static power level on your switch port with the power inline command.

<<< Please help the community by marking useful posts helpful, or accept as a solution if it resolved your issue >>>

Re: C2960-X POE Switch

Munavirc@94 — Mon, 11 Feb 2019 10:38:18 GMT

Hi Haydn,

It's an Aruba 315 AP

Re: C2960-X POE Switch

Munavirc@94 — Mon, 11 Feb 2019 10:40:18 GMT

Hi Jurgen,

Thanks for the information.I'll let you know what the after.
i appreciated

Re: C2960-X POE Switch

Munavirc@94 — Mon, 11 Feb 2019 13:06:03 GMT

Hi,

Can you share the commands for enabling LLDP.

Re: C2960-X POE Switch

Munavirc@94 — Mon, 11 Feb 2019 13:09:09 GMT

Hi Haydn,
Can you please share the Command lines for enable LLDP

Thanks and Regards

Re: C2960-X POE Switch

Jurgens L — Mon, 11 Feb 2019 13:09:16 GMT

Enabling LLDP
SUMMARY STEPS
1. enable

2. configure terminal

3. lldp run

4. interface interface-id

5. lldp transmit

6. lldp receive

7. end

8. show lldp