<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Re: 85MR3 Interim Build Availability in Wireless</title>
    <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3381654#M171968</link>
    <description>&lt;P&gt;Will publish on CCO week of may 14 or later?&lt;/P&gt;</description>
    <pubDate>Fri, 11 May 2018 07:44:01 GMT</pubDate>
    <dc:creator>Brian Taylor</dc:creator>
    <dc:date>2018-05-11T07:44:01Z</dc:date>
    <item>
      <title>85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3361962#M171954</link>
      <description>&lt;P&gt;We are pleased to announce the&amp;nbsp;fourth 85MR3 Interim&lt;FONT color="#008000"&gt; (8.5.124.64)&lt;/FONT&gt; for production deployment.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Access Request :&amp;nbsp;&amp;nbsp;&lt;A href="http://cs.co/85MR3Interim" target="_blank"&gt;http://cs.co/85MR3Interim&lt;/A&gt;&lt;/P&gt;
&lt;P&gt;(Within 24 hours automatic access to software download will be given)&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Software Image Download :&amp;nbsp;&lt;A href="http://cs.co/85MR3imagerepository" target="_blank"&gt;http://cs.co/85MR3imagerepository&lt;/A&gt;&lt;/P&gt;
&lt;P&gt;[&lt;STRONG&gt;NOTE&lt;/STRONG&gt;: Please make sure to use Aspera Client to download files, if downloading for the first time from shares.cisco.com you will be prompted to install Aspera Client on top of Website]&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Feedback Form :&lt;A href="http://cs.co/85MR3Feedback" target="_blank"&gt;http://cs.co/85MR3Feedback&lt;/A&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;If you already upgraded system to 8.5.124.64, we would appreciate if you can update this form : Link: &lt;A href="http://cs.co/85MR3InterimInstalls" target="_blank"&gt;http://cs.co/85MR3InterimInstalls&lt;/A&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&lt;FONT size="5"&gt;&lt;STRONG&gt;&lt;FONT color="#FF6600"&gt;8.5.124.64&lt;/FONT&gt;&lt;/STRONG&gt;&lt;/FONT&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh73821 wlc crash on sh run-config&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi96690 Cisco 2800 AP detects Intel Dual Band Wireless-AC 8260 as rogue client/AP&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvj01120 Cisco OEAP have DHCP server feature enabled by default even after disabling&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi98514 8.5.124.28:MAP ethernet port comes up as TRUNK and Allowed Vlan 4095&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvj07190 2800 AP not joining WLC if 'Enable NAT Address' feature is enabled&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi98154 8.5MR3 ME: SSH stopped working for WLC.&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi70783 WSA certficate is not upated on WLC&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh97636 3800/2800/1832 Flex APs stop redirecting CWA clients after WLAN change&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvj29270 Flex AP's wlan-vlan mapping mismatch in multiple WLC scenario.&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvj18004 8.5MR3Interim AP cannot join with NAT address on management interface of controller&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvj30550 WLC crashing when configuring PSK Provisioning key&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi09095 BZ1426 Radio reset Tx Jammed on 8.5.120.0 after upgrade&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi59432 Creation Time of Local Net User set to Jan 1 00:00:00 1970&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvj36853 AP name corruption after upgrade&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvj39005 Wireless Clients losing L2VNID override when performing Switchover on 5520&lt;/FONT&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&lt;FONT size="5"&gt;&lt;STRONG&gt;&lt;FONT color="#FF6600"&gt;8.5.124.55&lt;/FONT&gt;&lt;/STRONG&gt;&lt;/FONT&gt;&lt;/P&gt;
&lt;P&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi63043 Hyperlocation disabled, but WLC overfloods log with hyperlocation messages&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi33984 HA pair does not sync VLAN support configuration for mesh APs&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh98496 fan failure errors seen after upgrade to 8.3.133.10&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi42526 Mesh 1562 : AP will not go into bridge mode for I domain&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi95243 NBAR support for classifying Sprint as WiFi calling in 8.5&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi90205 WISM2 upgrade issues with 8.5.124.34 - EXT2-fs: Magic mismatch&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg70420 AP2800/3800 crashing while changing fields on OEAP page&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh63417 d0: *** sensord died (src/dspm_main.c:1662/0) - slot 0 ***&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi50929 3504 crashing on 8.6.101&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh85082 1562-I Failed to decode discovery response and crash&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh91290 AP-COS needs to send XID broadcast on client association for FlexConnect local switching&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi81204 Alpha: Barbados AP MTU issue with Fabric enable network.&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi01918 RRM stall - 3702 RF neighbor list empty on both WLC and AP on 5GHz&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi42632 AP generating 'hostapd' core files, WLC uptime goes to zero when this is seen&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi98357 Cisco AP1815I : Crashed unexpectedly due to 'watchdog reset(sync_log)'&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvj03021 After upgrade the AP VLAN Trunking config changed to "Disabled " state&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi61401 WLC remote access failing after upgrade&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi51372 Client unable to reach RUN state on anchor WLC with 802.1x + ISE NAC&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi12046 Flexconnect AP WLAN-VLAN Mapped incorrectly on AP2800&lt;/FONT&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&lt;FONT size="5"&gt;&lt;STRONG&gt;&lt;FONT color="#FF6600"&gt;8.5.124.43&lt;/FONT&gt;&lt;/STRONG&gt;&amp;nbsp;&lt;/FONT&gt;&lt;/P&gt;
&lt;P&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi56046 1560 RAP after reboot will lose the VLAN support configuration. &lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi52529 WLC: OsapiBsnTimer increase memory causing a crash, no crash file generated &lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi07565 3800 AP - Client EAP TLS not working with Zebra RF Gun which sends certificate in fragments &lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi57169 SDA-Wireless AAA Override VNID ID is lost when roaming from one AP Group to another &lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi57043 WLC: WLC hang suddenly without crash file, osapiReaper accessing file that doesn't exist &lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh89438 WLC 8510 SNMP Traps for Duplicate IP reported with IP address inversely. &lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh94458 Wave1 APs Last reload reason shows "Invalid image opcode" &lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi49114 8.5MR: AP 3700 memory allocation issue on IOS AP &lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh51835 WGB client not getting IP address from the VLAN returned as AAA override &lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi01675 New Mobility with 3650MA and 5520 Achor - Guest users cannot reach DG on 8.3.x &lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi53601 New Mobility Anchor Controller unexpectedly reboots with Task Name: mcListen &lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi22594 DNAC: Adding new WLC successful or existing devices show that inventory poll fails with SNMP issue &lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh54235 Cisco 3800 AP FW stopped working on Radio 0&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi17380 TxFSM stuck on Radio 0 with TCQVerify patch.&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg98078 AP with Flex AVC visibility Tx frames with sequence jumps causing client to not process packets&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi56738 IW3702 on auto-bridge mode not preserving channel width more than 20MHz&lt;/FONT&gt;&lt;/P&gt;
&lt;P&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi49590 Bad phase calibration values in Triggerfish EEPROM&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg87933 AP1815w consumes PoE+ 802.3at instead of using 8-9 watts with PoE disabled&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh81391 AP2800/3800 add Capwap ap-primed-join-timeout logic&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi21680 change 1810w max cdp power to old value 24.4w&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi57232 1815w AP-specific vlan override RLAN fails, ssid flexconnect vlan takes precedence after AP reboot&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi56738 IW3702 on auto-bridge mode not preserving channel width more than 20MHz&lt;/FONT&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&lt;FONT size="5"&gt;&lt;STRONG&gt;&lt;FONT color="#FF6600"&gt;8.5.124.34&lt;/FONT&gt;&lt;/STRONG&gt;&lt;/FONT&gt;&lt;/P&gt;
&lt;H3&gt;&lt;FONT face="arial,helvetica,sans-serif" size="2"&gt;8.5.124.34 is the first Interim build published from the 8.5.120.0 CCO image and it is an engineering special that resolves the following additional caveat(s):&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT face="arial,helvetica,sans-serif" size="2"&gt;This release already has incorporated Fixes from previous MR releases such as 8.2.166.0/8.2.167.x/8.3.140.0.&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT face="arial,helvetica,sans-serif" size="2"&gt;If you have DNAC/WSA deployments, we would request to hold for the next interim refresh.&lt;/FONT&gt;&lt;/H3&gt;
&lt;P&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCva26469 2800/3800 - More Packet Loss for Multicast traffic&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvb44979 WLC Local EAP with Cisco Unified Wireless IP Phone 7925 IP Phone Handshake Failure&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvc66728 WLC: Traceback pattern #2 on 8.2MR5 in apfProcessAssocReq&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvf10786 CAP 2800, 3800 sniffer mode logs wrong PHY and data rates for 802.11ac&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvf10811 sniffer mode APs should log more layer 1 information&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvf11072 ME: SUBNET_MISMATCH_IP_ADD_ON_MSCB mismatches while registering IP address x.x.x.x&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvf52731 New Mobility member status shows as Unknown when editing mobility member IP address&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvf61977 AP crash in watchdog reset(wcpd) -- AP3802I-B&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvf74377 AP3800 Sniffer mode: 802.11 acks, RTS, CTS, QoS Null packets do not get captured&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvf74406 AP3800 Sniffer mode: AP doesn't fill BAR Request Type, BAR Control, SSC, FCS in BAR and BA packets&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg18543 8.5MR: AP 3700 Tx jammed and radio reloads unexpectedly&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg19012 8.5MR1:OEAP 1815 performs "Start Network Diagnostics" test could hit different kinds of errors&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg19242 Cisco 1700/2700/3700 log wrong PHY in sniffer mode for 802.11ac&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg21910 Deleting one SSID will affect another SSID created on the same radio interface&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg29325 FTP download Fails on wlc when using untagged interfaces on different ports&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg34502 1542 AP not joining WLC with Costa Rica (CR) Country&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg38548 Walk index discrepency between 8.6 and 8.4. Needs to be corrected as per 8.4&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg40339 smr4: 2800 in sniffer mode is missing huge amount of data packets&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg44450 2800AP is not able to process the ARP Response&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg45986 WGB forwards downstream bcast within un-configured vlan to native vlan&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg54772 8.6: Buff Leak messages on ap console again when ap changes channel&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg56184 IOS APs in sniffer mode shows incorrect TID in captured traffic&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg61878 COS AP does not send k9w8 in LLDP Packets leading to false classification&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg64750 8.5MR1:HA osapi_file.c:1030 Failed to open the file, %OSAPI-3-SOCK_SEND_FAILED: [SA]osapi_support&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg73797 2800/3800 AP: Command timeout at 0x8000 in FW&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg74107 WLC reloads unexpectedly in Dot1x_NW_MsgTask - dynamic VLANs from AAA&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg75189 Cisco 1800 AP: Radio failure and firmware freeze&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg76168 5GHz radio interface on 1532 APs remains down due to DFS even when not all channels are blacklisted.&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg82066 1815I AP Reload due to Kernel Panic QCA #03226601&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg82156 2802E AP with Radio1 Crashing&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg87401 1542 AP Crash in Flex + Mesh mode&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg94522 TxFSM stuck on Radio 0 with new signature&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg94780 WLC crashing on 8.5.105.0&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg96160 WLC: Crashed after 1-day on 8.7 Alpha bring-up and ~7-users on tail-end of lunch rush at Cafe-11&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg96183 Proxy ARP always enabled in Beacon IE for Flex mode AP irrespective of ARP cache config&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg96533 Alpha 3800/2800 FIQ/NMI reset see on .98 image and .102&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg96852 Cisco 1815W SnifferMode AP beacons allows clients to join and blackhole traffic&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg96864 8.5MR1 - 8.5.107.110 - AP3702 Radio core with reason "Bad acq dtx"&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg97013 Cisco 8540 WLC reloads unexpectedly on Task Name: emWeb on 8.5.110.0&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvg98807 8.5MR1: AP702 crashes due to Illegal access to a low address&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh01114 autonomous AP should honor cos value and maps it to UP value accordingly&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh03119 Traceback with SNMPTask %OSAPI-5-MUTEX_UNLOCK_FAILED invalid(NULL) pointer passed. errcode = UNKNOWN&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh14509 Queue full issue observed with NmspNormalTxQ, breached 1 time. having Capacity 65535&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh15342 Apple client fails to pass traffic when after fast roaming because of sending EAPOL start in 4way HS&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh15852 WLC GUI/SSH not accessible - emweb consuming 100% cpu&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh16413 WLC System Crash with apfRogueTask_0&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh19127 AP1815I no response from wired side -&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh20238 Cisco 2800, 3800 APs joining the WLC in flex-mode fail to update FlexACL in group policies&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh22023 AP: FIQ/NMI crash in memcpy on 8.7.1.92&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh23473 AP1572 shows incorrect regulatory power level for Qatar domain&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh27557 Cisco 1562 AP limited to 54 Mbps in 2.4-GHz backhaul&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh28229 Incorrect count for cLApWlanStatsOnlineUserNum when SSID is changed&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh30228 Profile Longevity: AP1832I crashes with kernel panic on load 8.5.114.9 (8.5 MR2)&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh30447 MAP changes its statically assigned non-backhaul channel after it rejoins RAP&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh30872 Decrypt errors on 1532 AP&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh32590 AP:1852 - Observed a radio core on loading the image, 5G @0x0099B20C,&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh32630 FT Auth Response is corrupted when PMF is enabled&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh32971 Management Via Wireless Not Working&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh33064 Config logging traceinfo setting not restored correctly&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh48916 1815I pwr should consume power draw mentioned in the datasheet.&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh49820 WLAN disabled after any change due to PSK lost&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh50166 e model 2802 without dart connector being considered as RRF candidate and assigned 5 GHz role&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh51873 WLC CRASH Task Name: emWeb due to DATACORRUPTION-DATAINCONSISTENCY&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh55157 WLC reuses Acct-Session-Id when Client changes WLANs&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh56064 Profile: 2802I AP crashes due to kernel panic with load 8.5.114.15&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh58266 WLC CRASH Task Name: ccxL2RoamTask 0x162ad5d l2roamGetRrmNeighborList+77&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh58486 WLC CRASH Task Name: emWeb osapiMsgQueueDetailClear+42/usmDbMsgQueueDetailClear+27&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh59834 ME : Cannot change the role of XOR radio from Auto to Manual on AP2802E without DART&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh60627 3504 WLC crash with taskname 'osapiReaper'&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh60970 WLC CRASH Task Name: emWeb osapiMutexDumpAllLocked+890 after timezone setting of AP&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh61355 WLC need remove wgb behind wired client after wgb changes to worst uplink&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh61939 1562 MAP is not forwarding BPDUs sent by the RAP when using ethernet bridging&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh66002 AP sniffer doen't capture traffic when enabled for the first time on a channel&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh66793 AP 1815W - continuously logs: missing case for op class XXX in ieee80211_mbo_operating_class_to_chan&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh66816 WCPD crash with 1815w in RlanportControl element&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh67549 Cisco 8540 Data Plane reloads unexpectedly on __udp_input&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh67590 WLC delay packets due to high DP packet buffers in use&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh72613 AP crash when running 'show controller d1 atf cfs client'&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh73146 Controller crash due to clientTroubleShootingTask 8.3.133.0&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh73674 1562 MAP not sending Air Quality reports to WLC&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh75618 85MR2 - Starting NA Connector...message flood on WLC console&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh77719 External MDNS resolution fails with WLC 'link local bridging' enabled&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh78149 AP1815 Idle Clients is not removed after 24 hrs&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh78884 AP crashes on NBAR timer tick task&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh79344 WLC is returning values for 'cLSiIdrDeviceSignature' OID with a length &amp;gt;32 bytes&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh82606 LSC configurations are not persistent after certificate installation followed by system reboot&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh83197 1560 AP will create a loop when faling over to wireless and wired connection comes back&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh83328 WLC crash in loop while trying to download old config from tftp&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh85830 WLC Blocks Client MAC Authentication for wrong WLAN Profile&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh92524 Crash in wlc with eogre rule add cli&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh96132 8.5.110.0 too many channel changes on XOR 5GHz&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh98439 WLC stopped working while executing "config client deauthenticate &amp;lt;mac&amp;gt;" command&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvh99287 OEAP drops wired client traffic after N+1 failover&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi03114 1852 series access points crashing due to Kernel Panic&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi06165 IPSec tunnel is not coming up after disabling/changing the profile using PSK&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi06528 VLAN priority tag inside the EoGRE packet set to non-zero when 802.1p set to none&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi07460 WLC is incorrectly returning '5' for snmpwalk on bsnMobileStationApMode OID&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi07609 Cisco 5520 WLC experiences fatal dataplane crash at broffu_fp_dapi_cmd.c:4588&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi09424 Layer 3 Roam fails back to L2 Anchor with MAC Filtering MAB&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi11287 Cisco 2800 AP consistently reboots around 1 second after joining to the WLC&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi11609 DNS snooping not working for URL ACL after upgrade to 8.5&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi13706 MAP will map ethernet bridging wired devices to the wrong VLAN&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi17786 EoGRE client doesn't receive IP and stays in DHCP_REQ&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi19811 NBAR support for WiFi calling in 8.5&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi25420 COS AP always send RTS at 6 data rate when data rate is supported&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi30899 WLC 8.5 - AP fails to join the WLC when QA country code is used (-E AP)&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi31343 5520 HA Pair keeps crashing at on broffu_SocketReceive&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi34440 3504 Secondary Crashing Repeatedly&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi38017 Standby wlc continously rebooting after upgrade&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi39854 ME - HEAP Memory Leak when internal DHCP scopes are used&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi42743 ME: Image upgrade got stuck, Slave AP Status showing as "Initiated"&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi43963 AP1562D to AP1562D bridge does not transmit fragmented traffic on 8.5.120.0&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT size="1 2 3 4 5 6 7"&gt;CSCvi45088 AP2800: adjust NDP pkt transmission power level&lt;/FONT&gt;&lt;/P&gt;</description>
      <pubDate>Mon, 05 Jul 2021 15:28:36 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3361962#M171954</guid>
      <dc:creator>Salil Prabhu</dc:creator>
      <dc:date>2021-07-05T15:28:36Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3362091#M171955</link>
      <description>&lt;P&gt;Hi Salil,&amp;nbsp;&lt;/P&gt;
&lt;P&gt;I just reviewed, briefly, the list of fixed caveats and is&amp;nbsp;CSCvi20869 included in any way?&lt;/P&gt;</description>
      <pubDate>Fri, 06 Apr 2018 23:27:14 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3362091#M171955</guid>
      <dc:creator>Leo Laohoo</dc:creator>
      <dc:date>2018-04-06T23:27:14Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3362101#M171956</link>
      <description>&lt;P&gt;Hello Leo,&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;I will include the fix in the next refresh.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;regards, Salil&lt;/P&gt;</description>
      <pubDate>Fri, 06 Apr 2018 23:58:35 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3362101#M171956</guid>
      <dc:creator>Salil Prabhu</dc:creator>
      <dc:date>2018-04-06T23:58:35Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3362103#M171957</link>
      <description>Thanks, Salil.</description>
      <pubDate>Sat, 07 Apr 2018 00:01:27 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3362103#M171957</guid>
      <dc:creator>Leo Laohoo</dc:creator>
      <dc:date>2018-04-07T00:01:27Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3362128#M171958</link>
      <description>&lt;P&gt;Sorry to be a pain, Salil.&amp;nbsp; How about&amp;nbsp;&lt;SPAN&gt;CSCva34879?&lt;/SPAN&gt;&lt;/P&gt;</description>
      <pubDate>Sat, 07 Apr 2018 03:51:53 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3362128#M171958</guid>
      <dc:creator>Leo Laohoo</dc:creator>
      <dc:date>2018-04-07T03:51:53Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3362508#M171959</link>
      <description>&lt;P&gt;Hello Leo,&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;that bug is in U state (un-reproducible). So no fix .&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;regards, Salil&lt;/P&gt;</description>
      <pubDate>Mon, 09 Apr 2018 03:14:27 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3362508#M171959</guid>
      <dc:creator>Salil Prabhu</dc:creator>
      <dc:date>2018-04-09T03:14:27Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3362701#M171960</link>
      <description>Thanks, Salil.</description>
      <pubDate>Mon, 09 Apr 2018 09:36:17 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3362701#M171960</guid>
      <dc:creator>Leo Laohoo</dc:creator>
      <dc:date>2018-04-09T09:36:17Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3363941#M171961</link>
      <description>&lt;P&gt;Will you update this thread once a new build has been posted to the file share?&lt;/P&gt;</description>
      <pubDate>Wed, 11 Apr 2018 04:38:40 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3363941#M171961</guid>
      <dc:creator>Oscar Olsson</dc:creator>
      <dc:date>2018-04-11T04:38:40Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3363944#M171962</link>
      <description>Yes will do&lt;BR /&gt;</description>
      <pubDate>Wed, 11 Apr 2018 04:40:35 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3363944#M171962</guid>
      <dc:creator>Salil Prabhu</dc:creator>
      <dc:date>2018-04-11T04:40:35Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3370860#M171963</link>
      <description>&lt;P&gt;Just wondering, for the WLC 3504 it's the file AS_3500_8_......aes?&lt;/P&gt;
&lt;P&gt;The release notes don't tell and there is no readme file.&lt;/P&gt;</description>
      <pubDate>Mon, 23 Apr 2018 06:57:39 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3370860#M171963</guid>
      <dc:creator>patoberli</dc:creator>
      <dc:date>2018-04-23T06:57:39Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3370887#M171964</link>
      <description>&lt;P&gt;Just tested it, it's indeed the correct file. Upgrade worked, but I found some new, never seen, boot messages, once my single test AP connected:&lt;/P&gt;
&lt;PRE&gt;5	Mon Apr 23 09:08:17 2018	AP's Interface:0(802.11b) Operation State Up: Base Radio MAC:6c:50:4d:ab:0b:00 Cause=Reset while setting promiscous mode serving channel. Status:NA
6	Mon Apr 23 09:08:17 2018	AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:6c:50:4d:ab:0b:00 Cause=Reset while setting promiscous mode serving channel. Status:NA
7	Mon Apr 23 09:08:17 2018	AP's Interface:1(802.11a) Operation State Up: Base Radio MAC:6c:50:4d:ab:0b:00 Cause=Reset while setting promiscous mode serving channel. Status:NA
8	Mon Apr 23 09:08:17 2018	AP's Interface:1(802.11a) Operation State Down: Base Radio MAC:6c:50:4d:ab:0b:00 Cause=Reset while setting promiscous mode serving channel. Status:NA
9	Mon Apr 23 09:08:14 2018	AP's Interface:1(802.11a) Operation State Up: Base Radio MAC:6c:50:4d:ab:0b:00 Cause=Unknown Reset Status:NA
10	Mon Apr 23 09:08:14 2018	WIPS Alert: Reason "NoProfile" detected on AP MAC: 6c:50:4d:ab:0b:00, AP Name: 3502AGN-5U17-1
11	Mon Apr 23 09:08:14 2018	AP's Interface:0(802.11b) Operation State Up: Base Radio MAC:6c:50:4d:ab:0b:00 Cause=Unknown Reset Status:NA&lt;/PRE&gt;
&lt;P&gt;Never seen the first four messages of those before. I don't remember enabling promiscuous mode before (also the error message has a typo in promiscuous).&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Mon, 23 Apr 2018 07:51:33 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3370887#M171964</guid>
      <dc:creator>patoberli</dc:creator>
      <dc:date>2018-04-23T07:51:33Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3372419#M171965</link>
      <description>&lt;P&gt;Which file for 2504 wlc?&lt;/P&gt;</description>
      <pubDate>Wed, 25 Apr 2018 05:26:37 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3372419#M171965</guid>
      <dc:creator>Brian Taylor</dc:creator>
      <dc:date>2018-04-25T05:26:37Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3372437#M171966</link>
      <description>Hello Brian,&lt;BR /&gt;&lt;BR /&gt;AS_5500&lt;BR /&gt;&lt;BR /&gt;regards, Salil</description>
      <pubDate>Wed, 25 Apr 2018 06:02:52 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3372437#M171966</guid>
      <dc:creator>Salil Prabhu</dc:creator>
      <dc:date>2018-04-25T06:02:52Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3378205#M171967</link>
      <description>Just discovered that this release misses a dot in the filename of this forum post. Because of that it can't be found with 8.5mr3.&lt;BR /&gt;&lt;a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/195969"&gt;@Salil Prabhu&lt;/a&gt; could you maybe edit the title of your main post to include a dot between 8 and 5? &lt;span class="lia-unicode-emoji" title=":slightly_smiling_face:"&gt;🙂&lt;/span&gt; That way it would have the same naming scheme like the other beta releases.</description>
      <pubDate>Fri, 04 May 2018 15:07:36 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3378205#M171967</guid>
      <dc:creator>patoberli</dc:creator>
      <dc:date>2018-05-04T15:07:36Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3381654#M171968</link>
      <description>&lt;P&gt;Will publish on CCO week of may 14 or later?&lt;/P&gt;</description>
      <pubDate>Fri, 11 May 2018 07:44:01 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3381654#M171968</guid>
      <dc:creator>Brian Taylor</dc:creator>
      <dc:date>2018-05-11T07:44:01Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3381700#M171969</link>
      <description>We are anticipating end of May/early June.. We got some good Beta feedback, so team is preparing for a final Beta refresh next week to provide the customers the fixes.</description>
      <pubDate>Fri, 11 May 2018 09:49:24 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3381700#M171969</guid>
      <dc:creator>Salil Prabhu</dc:creator>
      <dc:date>2018-05-11T09:49:24Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3381702#M171970</link>
      <description>Sorry for the error.. I will hold the current link as the link has been circulating around and adding a . will append to the URL and many folks may see it not available any more.. But feedback ack'd</description>
      <pubDate>Fri, 11 May 2018 09:51:58 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3381702#M171970</guid>
      <dc:creator>Salil Prabhu</dc:creator>
      <dc:date>2018-05-11T09:51:58Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3383217#M171971</link>
      <description>&lt;P&gt;I just discovered that .55 is out. For some reason I didn't get a notification about this. Could you maybe check with the community webmasters for a way to notify us if a new release is posted?&lt;/P&gt;
&lt;P&gt;Thanks&lt;/P&gt;</description>
      <pubDate>Tue, 15 May 2018 06:52:56 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3383217#M171971</guid>
      <dc:creator>patoberli</dc:creator>
      <dc:date>2018-05-15T06:52:56Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3384673#M171972</link>
      <description>&lt;P&gt;.64 is out now. Given the bugs that have been fixed (like controller crash when doing sh run-config) it's a good idea to update. It also makes me think that internal QA seems very limited and that the code easily breaks when you make changes...&lt;/P&gt;</description>
      <pubDate>Thu, 17 May 2018 05:12:47 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3384673#M171972</guid>
      <dc:creator>Oscar Olsson</dc:creator>
      <dc:date>2018-05-17T05:12:47Z</dc:date>
    </item>
    <item>
      <title>Re: 85MR3 Interim Build Availability</title>
      <link>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3387848#M171973</link>
      <description>&lt;P&gt;&lt;SPAN&gt;We are running 8.5.124.55 code on 8540 (HA Pair 650 APs) and it looks like we are hitting CSCvg18543&amp;nbsp; - Cisco 3700AP Tx jammed and radio reloads unexpectedly&lt;/SPAN&gt;&lt;/P&gt;
&lt;DIV&gt;&amp;nbsp;&lt;/DIV&gt;
&lt;DIV&gt;&amp;nbsp;&lt;/DIV&gt;
&lt;P&gt;Ideas?&lt;/P&gt;</description>
      <pubDate>Wed, 23 May 2018 17:36:02 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/85mr3-interim-build-availability/m-p/3387848#M171973</guid>
      <dc:creator>Rod Kreutz</dc:creator>
      <dc:date>2018-05-23T17:36:02Z</dc:date>
    </item>
  </channel>
</rss>

