11v BTM test commands - cannot add candidates

gillavie — Mon, 05 Jul 2021 15:09:29 GMT

Hello,

I am working Cisco controller 5508 with SW version 8.3.124.61

My wlan consist out of 3 APs.

I am trying to test 11v BTM feature, using CLI test commands:

test 11v btmreq candidate/option/send ...

When trying to add and send BTM with candidate list, I receive log massages which indicates I do not have neighbours, even though I do.

Also, I have used the "test 11v btmreq candidate" commands to add all three APs to the candidate list.

I am not sure what information is required to debug this issue, so please help me out.

Thanks,

Gil

Re: 11v BTM test commands - cannot add candidates

Flavio Miranda — Wed, 24 Jan 2018 15:24:16 GMT

Hi,

You can try this debug:

debug 11v ?

all - Configures debug of all 802.11v events
detail - Configures debug of 802.11v detail
errors - Configures debug of 802.11v errors
events - Configures debug of 802.11v events
optimization - Configures debug of 802.11v Optimizations
simulation Configures debug of 802.11v for simulation data

-If I helped you somehow, please, rate it as useful.-

Re: 11v BTM test commands - cannot add candidates

gillavie — Thu, 25 Jan 2018 09:41:07 GMT

This is the output log:

(Cisco Controller) >debug 11v all enable

(Cisco Controller) >test 11v btmreq candidate add 00:fe:c8:73:6a:70 59

(Cisco Controller) >test 11v btmreq candidate add 6c:99:89:ac:bc:d0 229

(Cisco Controller) >test 11v btmreq candidate add e0:d1:73:03:c0:30 139

(Cisco Controller) >test 11v btmreq options 25 1 1 0 0 0 0

BSS Termination Duration(0-65535)

(Cisco Controller) >test 11v btmreq options 25 1 1 0 0 0 0 0

Validity Interval(0-254)

(Cisco Controller) >test 11v btmreq options 25 1 1 0 0 0 0 0 254

(Cisco Controller) >test 11v btmreq send fe:c0:34:27:20:21

(Cisco Controller) >*emWeb: Dec 23 16:42:24.076: AP Mac: 00:fe:c8:73:6a:70
*emWeb: Dec 23 16:42:24.077: Client Mac: fe:c0:34:27:20:21
*emWeb: Dec 23 16:42:24.077: Slot ID: 0
*emWeb: Dec 23 16:42:24.077: Vap ID: 3
*emWeb: Dec 23 16:42:24.077: Changed Vap ID: 1
*emWeb: Dec 23 16:42:24.077: Building BSS Transition Request Frame
*emWeb: Dec 23 16:42:24.077: Adding Neighbor List Subelement
*emWeb: Dec 23 16:42:24.077: neighList[0]: slot = 0, BSSID = 6c:99:89:ac:bc:d0 rssi = -59 roamType 2

*emWeb: Dec 23 16:42:24.077: neighList[1]: slot = 0, BSSID = e0:d1:73:03:c0:30 rssi = -59 roamType 2

*emWeb: Dec 23 16:42:24.077: Total neighbor count = 2 in neighList

*emWeb: Dec 23 16:42:24.077: apf80211KAddNeighborReportEntriesFromList: Checking neighbor BSSID 6c:99:89:ac:bc:d0 for slot 0, vapId 1
*emWeb: Dec 23 16:42:24.077: Starting Vap loop between 1 and 1

*emWeb: Dec 23 16:42:24.077: Neighbor 6c:99:89:ac:bc:d0: Vap enabled 1, vapId 1, qos 1, apsd 1, radioMeas 1, spectrum 0

*emWeb: Dec 23 16:42:24.077: Adding neighbor 6c:99:89:ac:bc:d0 to report

*emWeb: Dec 23 16:42:24.077: AP Vlan ID not found; Neighbor base Mac: 6c:99:89:ac:bc:d0, global VapId 1, 11k BSSID: 6c:99:89:ac:bc:d0

*emWeb: Dec 23 16:42:24.077: Releasing neighbor lock 6c:99:89:ac:bc:d0

*emWeb: Dec 23 16:42:24.077: apf80211KAddNeighborReportEntriesFromList: Checking neighbor BSSID e0:d1:73:03:c0:30 for slot 0, vapId 1
*emWeb: Dec 23 16:42:24.077: Starting Vap loop between 1 and 1

*emWeb: Dec 23 16:42:24.077: Releasing neighbor lock e0:d1:73:03:c0:30

*emWeb: Dec 23 16:42:24.077: No Neighbor Candidate found :Resetting Candidate Included List
*emWeb: Dec 23 16:42:24.077: Data Length of BSS Transition Request Frame: 4
*emWeb: Dec 23 16:42:24.077: apf80211vHandleBSSTransReq: lradMacAddr: 00:fe:c8:73:6a:70 rscb parent MAC ADDR: 00:fe:c8:73:6a:70 rscb mac address: 00:00:00:00:00:00
*emWeb: Dec 23 16:42:24.077: BSS Termination option is not set
*emWeb: Dec 23 16:42:24.077: fe:c0:34:27:20:21 apf80211vSendPacketToMs: 802.11v Action Frame sent successfully to wlc
*apfOpenDtlSocket: Dec 23 16:42:24.091: fe:c0:34:27:20:21 Recevied management frame ACTION on BSSID 00:fe:c8:73:6a:70 destination addr 00:fe:c8:73:6a:70
*apfMsConnTask_7: Dec 23 16:42:24.091: fe:c0:34:27:20:21 Got action frame from this client.
*apfMsConnTask_7: Dec 23 16:42:24.091: fe:c0:34:27:20:21 Received a 11v Action Frame with code [8] from mobile station
*apfMsConnTask_7: Dec 23 16:42:24.091: Received 80211v_BSS_TRANS_RESP Action Frame
*apfMsConnTask_7: Dec 23 16:42:24.091: WLAN-id : 3 | vap_ip : 1
*apfMsConnTask_7: Dec 23 16:42:24.091: fe:c0:34:27:20:21 Posting msg of type: APF_80211v_MSG_BSS_TRANS_RESP for STA and LRAD:00:fe:c8:73:6a:70,slot:0, len:2
*apfMsConnTask_7: Dec 23 16:42:24.091: 11v g_msgQueue = 0x2c6362a0, osapiMessageSend rc = 0

*apf80211vTask: Dec 23 16:42:24.091: apf80211vTask: INVALID MSG ID: 2

topic Re: 11v BTM test commands - cannot add candidates in Wireless

11v BTM test commands - cannot add candidates

Re: 11v BTM test commands - cannot add candidates

Re: 11v BTM test commands - cannot add candidates