Cisco Hyperlocation

Oleg Volkov — Mon, 05 Jul 2021 13:44:14 GMT

Dear Sirs! I will try to use Hyperlocation for robots navigation (on warehouse) and I want to make small area for test (1-4 AP).
What I need?
1. AP like 3700 and hyperlocation module for it
2. WLC controller
3. CMX software
It is correct?
Can I get evaluation software version and license?
Thanks!

Yes, to do this properly you

William Kuczmera — Thu, 23 Mar 2017 15:20:22 GMT

Yes, to do this properly you will need the following. ...

1. 3700 or 3800 with the Hyperlocation module as well as antenna. these are 2 different part #s last time I built out a bom for this type of solution.

2. WLC

3. CMX -- pay close attention the licenses you purchase or do not purchase.

http://www.cisco.com/c/en/us/solutions/collateral/enterprise-networks/connected-mobile-experiences/guide-c07-734430.html

I would highly recommend performing an on site wireless survey as well. I believe surveys are important for any wireless deployment but even more so in a Hyperlocation based design.

William Kuczmera

wkuczmera@optiodata.com

topic Yes, to do this properly you in Wireless

Cisco Hyperlocation

Yes, to do this properly you