topic Thanks for the report in Wireless

WLCCA Version 4.3.8

Javier Contreras — Mon, 05 Jul 2021 13:43:24 GMT

New Version 4.3.8 available:

Fixed

Loop while parsing invalid mDNS config output
Error parsing country list on 8.3
Several parsing errors for corrupted files
Improved data collection on corrupted files
Exception when displaying dual band RX neighbor list
Properly filtering by band in dual 5GH scenarios in AP group/Flex group detailed view

Added

Guest Lan support

Is WLCCA only for versions 4

pwwiddicombe — Thu, 06 Apr 2017 18:47:01 GMT

Is WLCCA only for versions 4.0 to 8.0? I'm seeing some funny things running it on a run-config from 8.3.102.0 - like telling me I'm running channels not in the DCA, while 1, 6, 11 definitely are in the DCA.

Hi

Javier Contreras — Fri, 07 Apr 2017 13:59:34 GMT

Version 4.3.8 has been tested with files from 4.0 to 8.3.112.0, so yes, fully supported

if you see data that is not matching expected results, please send the file to me for analysis, thanks

Regards

Is there a Mac version coming

nshoe18 — Tue, 25 Apr 2017 14:55:27 GMT

Is there a Mac version coming for this or only Windows?

Hi

Javier Contreras — Tue, 25 Apr 2017 15:26:24 GMT

Mac version as such is not coming, the porting using Mono proved to be almost a complete rewrite, due to the multiple incompatibilities, and it is a lot slower than the windows implementation.

we are evaluating other options, but nothing coming out soon.

regards

I just noticed a small issue

jamsaylo — Thu, 27 Apr 2017 13:31:27 GMT

I just noticed a small issue with some of the columns not lining up properly in the rogue policies. Towards the end, they seem to be staggered 1 to the right. For instance, Adhoc detection shows 0 (which lines up with Rogue AP AAA val), Adhoc contain shows true (which lines up with Adhoc detection), etc etc.

Thanks for the report

Javier Contreras — Fri, 28 Apr 2017 14:34:59 GMT

Thanks for the report

yes, there was a missing column (valid client containment), I just corrected it

it will be on next version update

for problem reports, please use wlc-conf-app-dev@cisco.com, thanks!

regards

Re: WLCCA Version 4.3.8

mattfry1373 — Thu, 08 Nov 2018 13:16:33 GMT

Where can this software be downloaded?

Re: WLCCA Version 4.3.8

Scott Fella — Thu, 08 Nov 2018 14:05:52 GMT

Files can be downloaded from here.

https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYPES=wlc-conf-app-dev

Re: WLCCA Version 4.3.8

Craig Hunt — Wed, 28 Nov 2018 19:09:38 GMT

I can't get to the download page. It says "Secure Connection Failed".

Re: WLCCA Version 4.3.8

Scott Fella — Wed, 28 Nov 2018 20:09:04 GMT

Did you request access:

"WLCCA download link: https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYPES=wlc-conf-app-dev
To request access to WLCCA tool, please send an e-mail to wlc-conf-app-dev@cisco.com. Important: include your Cisco.com username."

Re: WLCCA Version 4.3.8

Craig Hunt — Wed, 28 Nov 2018 20:13:50 GMT

I have downloaded previous versions without any problem. Do I have to register every time a new version is released?

Re: WLCCA Version 4.3.8

Scott Fella — Wed, 28 Nov 2018 20:20:04 GMT

You shouldn’t. I was able to get to the downloads.