https://community.cisco.com/t5/wireless/wlc2500-problem/m-p/3074118#M172891 <P>Hi!</P> <P></P> <P></P> <P>I have an issue with my WLC2504 box. After some manipulation of the box :</P> <P>- I cannot reset the config : it comes back to the config I had set in</P> <P>- I cannot use the Console port any longer (?)&nbsp;</P> <P>- the only way to access the console mode I have, is through the AP 1832I console port...but the controller does not accept the administrator password. Dead!</P> <P></P> <P>Let's start there!</P> <P></P> <P>Jeff</P> <P></P> <P></P> Mon, 05 Jul 2021 13:38:00 GMT joyride_us2 2021-07-05T13:38:00Z https://community.cisco.com/t5/wireless/wlc2500-problem/m-p/3074118#M172891 <P>Hi!</P> <P></P> <P></P> <P>I have an issue with my WLC2504 box. After some manipulation of the box :</P> <P>- I cannot reset the config : it comes back to the config I had set in</P> <P>- I cannot use the Console port any longer (?)&nbsp;</P> <P>- the only way to access the console mode I have, is through the AP 1832I console port...but the controller does not accept the administrator password. Dead!</P> <P></P> <P>Let's start there!</P> <P></P> <P>Jeff</P> <P></P> <P></P> Mon, 05 Jul 2021 13:38:00 GMT https://community.cisco.com/t5/wireless/wlc2500-problem/m-p/3074118#M172891 joyride_us2 2021-07-05T13:38:00Z https://community.cisco.com/t5/wireless/wlc2500-problem/m-p/3074119#M172892 <P>Connect to the console port reboot the controller. Shortly after it starts booting you'll be prompted to hit esc to enter a boot menu. Hit esc and you will be prompted to select an option, one of this is Clear configuration.</P> <P><A href="https://www.cisco.com/c/en/us/td/docs/wireless/controller/2500/quick/guide/ctr2504-qs.html">https://www.cisco.com/c/en/us/td/docs/wireless/controller/2500/quick/guide/ctr2504-qs.html</A></P> Wed, 01 Mar 2017 17:04:33 GMT https://community.cisco.com/t5/wireless/wlc2500-problem/m-p/3074119#M172892 M. Wisely 2017-03-01T17:04:33Z