topic Chandana, in Wireless

Cisco 3702i Access Point Flashing Red, Blue, Green Constantly

nish — Mon, 05 Jul 2021 13:28:13 GMT

I have deployed 30 Cisco 3702i access points on a Cisco 5508 Wireless LAN controller running IOS code 8.0.140.0. Only 4 out of the 30 are flashing red, blue, and green constantly, but the other 26 are either solid green or solid blue like normal. The weird thing is I see my client MAC address associated to one of the flashing access points, and is able to access the network fine. Looks like a cosmetic issue, but would like to fix the flashing access points to be either solid green or solid blue like normal operation. Does anybody know why this is happening?

I have attached a video of slow motion of the LED and a video normal speed.

Check the configuration of

Leo Laohoo — Mon, 30 Jan 2017 20:31:17 GMT

Check the configuration of the AP. Indefinite Flash is enabled.

Nish,

Chandana Abeysinghe — Mon, 30 Jan 2017 20:52:25 GMT

Nish,

It looks like, it cycles through Cycles through RED, GREEN and OFF. That means, the AP is an universal AP which needs to get primed.

This youtube link shows the process of priming universal AP.

https://www.youtube.com/watch?v=iBJrOYYlj7A

This document describe all the details about priming.

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html

I hope this will help.

-Chandana

Chandana,

nish — Mon, 30 Jan 2017 21:49:47 GMT

Chandana,

The color cycle is RED, BLUE, GREEN, RED, BLUE, GREEN over and over. There is no stop or pause between the colors. It is constant switching of the LED colors. As I mentioned above the AP with this affect works.

Leo,

nish — Mon, 30 Jan 2017 21:57:04 GMT

Leo,

Thank you for mentioning this. Didn't know this feature.

Thanks for taking the time to

Leo Laohoo — Tue, 31 Jan 2017 03:36:49 GMT

Thanks for taking the time to rate our posts. 🙂

Re: Cisco 3702i Access Point Flashing Red, Blue, Green Constantly

williamsonjason — Thu, 02 Nov 2023 13:44:11 GMT

(my notes) Trying to find a lost AP?

Ssh to controller

Config ap led-state flash indefinite (to make it flash red green blue, indefinitely)
---------------

Config ap led-state flash disable (to turn off the flashing)

Re: Cisco 3702i Access Point Flashing Red, Blue, Green Constantly

JPavonM — Thu, 02 Nov 2023 17:02:18 GMT

if the color cycle is slightly different the AP maybe having not enough inline power:

Cycling through blue, green, red, and off

General warning; insufficient inline power