topic Web Auth Bundle in Wireless

Web Auth Bundle

Jim Kerr — Mon, 05 Jul 2021 13:08:27 GMT

Hi All

I'm currently working with a Cisco 4402 WLC (version 5.2.193.0). The WLC already has a customised Web Auth Bundle on the controller which contains the following files: login.html, terms.html & logo.html

These files provide the display for guests to view the terms and conditions, it provides the company logo and background etc.

However I want to take a copy of the Web Auth files and copy them to my local machine (so I can use them somewhere else).

I think this has to be done from the CLI on the WLC to upload the files. I can see the files (shown in the attached document) but I'm not sure how to copy them off.

Please can someone help with the details on how to do it ?

thanks

Via GUI its not possible but

Sandeep Choudhary — Mon, 21 Nov 2016 07:02:21 GMT

Via GUI its not possible but you can try to upload via CLI:

Here is the method:

(WLC1) >transfer upload mode tftp
(WLC1) >transfer upload datatype webauthbundle
(WLC1) >transfer upload serverip 192.168.19.7
(WLC1) >transfer upload filename destination-filename
(WLC1) >transfer upload start

Mode............................................. TFTP
TFTP Server IP................................... 192.168.19.7
TFTP Path........................................
TFTP Filename.................................... destination-filename
Data Type........................................ webauth bundle

Are you sure you want to start? (y/N) y

File transfer operation completed successfully.

(WLC1) >

Regards

Dont forget to rate helpful posts

thanks Sandeep.

Jim Kerr — Tue, 22 Nov 2016 12:07:31 GMT

thanks Sandeep.

I've tried following your instructions and get an error message 'Incorrect input - Requires datatype: Config/Crashfile/errorlog/PAC/Invalid-config/systemtrace/trap log'.

I've attached the error for information.

I know that the webauth bundle is on the controller as it shows if you do a show custom-web webauth-bundle (screen shot attached).

Any ideas ?

HI Jim,

Sandeep Choudhary — Tue, 22 Nov 2016 12:29:17 GMT

HI Jim,

You have very old version SW on WLC. So you don't have this command available on 4400 series.

transfer upload datatype webauthbundle

datatype webauthbundle is not avilable in 5.2 series. I was having 8.0.133.0 on my WLC.

Now I think You don't have any other option to upload the bundle from the WLC to a machine to preview.

Regards

Dont forget to rate helpful posts