topic APs' Telnet interface in Wireless https://community.cisco.com/t5/wireless/aps-telnet-interface/m-p/158048#M17366 <P>Here's a silly one, but it's been bugging me for a while:</P><P></P><P>How do you gracefully exit out of a telnet session to an AP? i've been killing the connection via my emulator, but if I'm into the AP through a router, I have to re-establish the connection with the router.</P><P></P><P>The manuals don't give any consideration to closing out the telnet session.</P><P></P><P>Any help is appreciated.</P> Sun, 04 Jul 2021 15:26:51 GMT ED CARMODY 2021-07-04T15:26:51Z APs' Telnet interface https://community.cisco.com/t5/wireless/aps-telnet-interface/m-p/158048#M17366 <P>Here's a silly one, but it's been bugging me for a while:</P><P></P><P>How do you gracefully exit out of a telnet session to an AP? i've been killing the connection via my emulator, but if I'm into the AP through a router, I have to re-establish the connection with the router.</P><P></P><P>The manuals don't give any consideration to closing out the telnet session.</P><P></P><P>Any help is appreciated.</P> Sun, 04 Jul 2021 15:26:51 GMT https://community.cisco.com/t5/wireless/aps-telnet-interface/m-p/158048#M17366 ED CARMODY 2021-07-04T15:26:51Z Re: APs' Telnet interface https://community.cisco.com/t5/wireless/aps-telnet-interface/m-p/158049#M17367 <HTML><HEAD></HEAD><BODY><P>You need to enter the close command in the command line mode by prefixing it with a colon. You can view this and other commands by accessing the help.</P><P></P><P>:CLOSE Close the telnet session if the connection is open</P><P></P><P>Regards</P><P></P><P>Kev</P></BODY></HTML> Wed, 15 Jan 2003 12:37:12 GMT https://community.cisco.com/t5/wireless/aps-telnet-interface/m-p/158049#M17367 kagodfrey 2003-01-15T12:37:12Z