topic Hi Leo in Wireless

AP1702i does not join WLC5520

kuweb — Mon, 05 Jul 2021 12:34:00 GMT

Hello I have a problem to join a 1702i AP to the 5520 controller. I have attached the debug capwap and the console output of the AP.

On the Controller runs the newest SW Release 8.3.102

Has anyone an idea whats the problem?

Thanks for your help

Leo Laohoo — Thu, 04 Aug 2016 12:45:25 GMT

Unknown AP type. Using Controller Version!!!

kuweb — Thu, 04 Aug 2016 12:50:04 GMT

Hi Leo

I saw this bug, and I installed the newest (fixed) version 8.3.102. But it doesn't work

Sandeep Choudhary — Thu, 04 Aug 2016 13:02:20 GMT

which country did you configure on WLC ?

Make sure the time is set properly on the WLC and also make sure the country code for the APs are set on the WLC.

Regards

kuweb — Thu, 04 Aug 2016 13:03:38 GMT

Hi Sandeep

On the controller I configured CH - Switzerland and the AP is AIR-CAP1702I-E-K9 that should be o.k.

Sandeep Choudhary — Thu, 04 Aug 2016 13:15:43 GMT

yes regulatory domain is ok.

Did you set the time correctly ? also try to reboot WLC!!!

if still fail then use any other software...

Regards