topic Cisco Unified Wireless IP in Wireless

Maximum Clients per AP

yannick.heyne1 — Mon, 05 Jul 2021 12:21:32 GMT

Hello, Support team
With a customer are the following AP in use application: AIR-LAP1242AG-C-K9 / AIR-CAP2602E-C-K9 / AIR-CAP2702E-C-K9 / AIR-CAP3602E-C-K9
If there is for this AP a written out Maximun number of clients under use of Voice via Jabber. Currently are isolated according to position of AP between 50 and 55 clients connectet.
Unfortunately, I could find in none of the Deployment guides a maximum number of recommended clients. I need this, because I must deliver a postwhite for a strain of the range to the customer.
Greeting

Cisco Unified Wireless IP

Leo Laohoo — Mon, 04 Jul 2016 21:04:19 GMT

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide

In high density deployments

mohanak — Tue, 05 Jul 2016 01:49:22 GMT

In high density deployments we regularly see upto 100 clients on a radio. From a design perspective for enterprise typicall quote 30 clients per radio suggests to provide a good user experience. If I was seeing many more than this I would like to think about adding aps. What you may often see is access points deployed where we only have the 5GHz radio switched on to limit co-channel interference. Also keep in mind that the AC module for the 3600 only supports up to 50 clients and 7 Eplicit BeamForming clients. Just while you are looking at your numbers of clients in an area.

http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html#~accesspoints

Hi,

hajia — Wed, 06 Jul 2016 06:46:10 GMT

Hi,

Usually I'll suggest 20-30 clients per AP, but if you use jitter sensitive apps like jabber or vowifi, I'll suggest you to allow less 20 clients per AP.

Becase they use the same channel, and CSMA/CA, so the more user you have, the more jitter you feel.