Save WLAN Config per CLI on 3850 Switch

j.greza — Mon, 05 Jul 2021 11:44:24 GMT

Hello Experts,

I have a question for a 3850 Switch with WLAN Configuration.

How can I perform a data backup via CLI for the WLAN Configuration.
On the configuration file with "show run" no Access Point configurations appear.Only in the dot11 parameters I see the Config . Are these included in the running-config?
Of course it is possible to save the Configuration about wireless WEB GUI.How is the best way to perform a backup using CLI or PI.

Thanks

Jürgen

Access-point specific

Freerk Terpstra — Sun, 27 Mar 2016 18:47:22 GMT

Access-point specific settings will be saved on the access-point itself, that is the reason why you don't see it in the configuration. The output of a "show run" combined with installed certificates (don't forget the private key), vlan.dat file on the flash and also uploaded web files should be sufficient.

Please rate useful posts... 🙂

topic Save WLAN Config per CLI on 3850 Switch in Wireless

Save WLAN Config per CLI on 3850 Switch

Access-point specific