topic what I mean is if there is in Wireless

PWRINJ4

malsaadi2 — Mon, 05 Jul 2021 11:23:34 GMT

Hi everybody,

i have new access point 3702E with directional anntena, i think it needs power more than 15.4

the access switch 2960x 24 370W, that's mean each port 15.4.

my question is have i go with PWRINJR4 or PWRINJR5 to increase the power.

Scott Fella — Wed, 16 Dec 2015 15:44:18 GMT

You need the PWRINJR-4. You can reference this day at sheet that mentions that specific model number:

http://www.cisco.com/c/en/us/td/docs/wireless/technology/apdeploy/8-0/Cisco_Aironet_3700AP.html

-Scott

*** Please rate helpful posts ***

malsaadi2 — Wed, 16 Dec 2015 17:00:17 GMT

Hi scott Fella,

can i use access switch 2960x no poe with that pwrinjr4

because pwrinjr4 will provde 20w, l think no need to purchase switch POE while there is power injector 4 available

malsaadi2 — Wed, 16 Dec 2015 17:10:42 GMT

what I mean is if there is switch 802.af plus pwrinjr5 how many W can we take

15.4+15.4= more than 20

is that correct?!

Scott Fella — Wed, 16 Dec 2015 18:33:12 GMT

You need to either have a 802.af or use a pwrinjr4. There is no combination of power, bottom line, use one or the other.

-Scott

*** Please rate helpful posts ***

malsaadi2 — Wed, 16 Dec 2015 18:41:52 GMT

Mr. Scott Fella,

i am confused, do mean i can go with switch no poe with power injector4

Scott Fella — Wed, 16 Dec 2015 18:56:39 GMT

You can use the switch as long as it supports the recommended power.

-Scott

*** Please rate helpful posts ***

mohanak — Wed, 13 Jan 2016 09:12:55 GMT