dhcp proxy

chemban_2015 — Mon, 05 Jul 2021 11:23:08 GMT

Hi,

I tried to capture (dhcp) packet from the wirelss client .(attached)
The source shown in the capture is layer 3 interface ip of the vlan (10.0.x.x) .
Does it mean it is working in proxy enabled mode ?
If yes Server identifier must be the interface vlan ip (10.0.x.x).?
But in my case the Server identifier is the DHCP server .

interface Vlan10
ip address 10.0.x.x 255.255.255.0
ip helper-address 192.168.x.x
end

Thank you

Check this post and analyze..

Sandeep Choudhary — Mon, 14 Dec 2015 19:34:19 GMT

Check this post and analyze...

https://rscciew.wordpress.com/2014/07/16/dhcp-with-the-wlc/

Regards

Dont forget to rate helpful posts

topic Check this post and analyze.. in Wireless

dhcp proxy

Check this post and analyze..