Active Power Levels by Rate

DJX995 — Mon, 05 Jul 2021 11:20:38 GMT

I have a 1262 in the USA and these are my active power levels by rate:

AIR-AP1262N-A-K9

show controllers dot11radio0

show controllers dot11radio1

2.4GHz:

Active power levels by rate
     1.0 to 11.0  , 20  dBm
     6.0 to 48.0  , 17  dBm, changed due to regulatory maximum
    54.0 to 54.0  , 16  dBm, changed due to regulatory maximum
   6.0bf to 48.0bf, 17  dBm, changed due to regulatory maximum
  54.0bf to 54.0bf, 16  dBm, changed due to regulatory maximum
    m0-2 to m5-2  , 17  dBm, changed due to regulatory maximum
    m6-2 to m6-2  , 16  dBm, changed due to regulatory maximum
    m7-2 to m7-2  , 14  dBm, changed due to regulatory maximum
    m8-2 to m13-2 , 17  dBm, changed due to regulatory maximum
   m14-2 to m14-2 , 16  dBm, changed due to regulatory maximum
   m15-2 to m15-2 , 14  dBm, changed due to regulatory maximum
    m0-4 to m4-4  , 17  dBm, changed due to regulatory maximum
    m5-4 to m6-4  , 16  dBm, changed due to regulatory maximum
    m7-4 to m7-4  , 14  dBm, changed due to regulatory maximum
    m8-4 to m12-4 , 17  dBm, changed due to regulatory maximum
   m13-4 to m14-4 , 16  dBm, changed due to regulatory maximum
   m15-4 to m15-4 , 14  dBm, changed due to regulatory maximum
    6.0d to 18.0d , 17  dBm, changed due to regulatory maximum
   24.0d to 36.0d , 16  dBm, changed due to regulatory maximum
   48.0d to 48.0d , 14  dBm, changed due to regulatory maximum
   54.0d to 54.0d , 13  dBm, changed due to regulatory maximum
  OffChnl Power: 20, Rate 1.0

5GHz

Active power levels by rate
     6.0 to 36.0  , 17  dBm
    48.0 to 48.0  , 16  dBm, changed due to regulatory maximum
    54.0 to 54.0  , 12  dBm, changed due to regulatory maximum
   6.0bf to 36.0bf, 17  dBm
  48.0bf to 48.0bf, 16  dBm, changed due to regulatory maximum
  54.0bf to 54.0bf, 12  dBm, changed due to regulatory maximum
    m0-2 to m4-2  , 17  dBm
    m5-2 to m5-2  , 15  dBm, changed due to regulatory maximum
    m6-2 to m6-2  , 11  dBm, changed due to regulatory maximum
    m7-2 to m7-2  , 10  dBm, changed due to regulatory maximum
    m8-2 to m12-2 , 17  dBm
   m13-2 to m13-2 , 15  dBm, changed due to regulatory maximum
   m14-2 to m14-2 , 11  dBm, changed due to regulatory maximum
   m15-2 to m15-2 , 10  dBm, changed due to regulatory maximum
  OffChnl Power: 17, Rate 6.0

I'd like to compare mine to some more recent Cisco APs, like the 3700.

Can anyone share their outputs?

Thanks.

Here is output from one of my

Rasika Nayanajith — Mon, 07 Dec 2015 10:48:50 GMT

Here is output from one of my 3702 (AIR-CAP3702I-Z-K9)

Since yours is a LWAP I don't

DJX995 — Mon, 07 Dec 2015 17:44:50 GMT

Since yours is a LWAP I don't thnink the output includes the information I'm looking for.

It's also from a different region (Z), so I'm not sure how well that would compare.

Thanks anyway.

topic Here is output from one of my in Wireless

Active Power Levels by Rate

Here is output from one of my

Since yours is a LWAP I don't