topic See the meaning of LED status in Wireless

Cisco 3702i Issues

Neville Price — Mon, 05 Jul 2021 10:27:00 GMT

I have been installing and configuring, a large deployment of new 3702i access points. I have an issue on a couple of them, they have joined the controller, and downloaded the correct version, and are now blinking green constantly, I can see them on the switch and WLC, 99% of all the others are working correctly.

and are now blinking green

Leo Laohoo — Tue, 23 Jun 2015 09:27:47 GMT

and are now blinking green constantly,

Could mean the AP didn't re-join the controller after firmware upgrade.

Console into the AP and post the following output:

1. WLC: sh sysinfo;

2. AP: sh version

The AP Has rejoined the

Neville Price — Wed, 24 Jun 2015 07:11:41 GMT

The AP Has rejoined the controller, with the correct version etc, but is still constantly blinking green.

See the meaning of LED status

Sandeep Choudhary — Wed, 24 Jun 2015 07:33:47 GMT

See the meaning of LED status Indication :

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/3700/quick/guide/ap3700getstart.html#60734

Also check:

Is AP getting IP address ?

Is there any cable related issue connecting to switch ?

provide the console logs to see where and what actually happening?

Regards

Don't forget to rate helpful posts

Then maybe someone's playing

Leo Laohoo — Wed, 24 Jun 2015 22:13:23 GMT

Then maybe someone's playing a prank and enabled LED flashing to be continuous.

All sorted, very strange

Neville Price — Fri, 26 Jun 2015 07:00:53 GMT

All sorted, very strange issue, it was getting an IP and connecting to the WLC, a simple manual reboot at the AP side did the trick.