topic "Enable Dynamic AP management in Wireless

PC not able to get ip address via DHCP

kuldeep.kaur — Mon, 05 Jul 2021 10:19:03 GMT

Hi Guys,

I have the same problem again which I thought was solved. My PC wireless adaptor not able to get ip address from the switch which is a dhcp server.

My setup is like this:

WLC5508 ---> 3750 (DHCP Server) ----> 3560 ---> Access Point

My pc wireless adaptor is connect to the WLAN but not able to get ip address. When I also connect my pc with a ethernet cable to the 3750 swtich my pc is able to get the address. Can someone please help me out again. Enclosed is the config of the dynamic interface. I have tried configuring ip address of the switch on the WLC but still no success.

Thanks

You have to configure your

Rasika Nayanajith — Fri, 29 May 2015 01:38:13 GMT

You have to configure your DHCP IP address under dynamic_interface configuration. Then you should able to get this working

HTH

Rasika

*** Pls rate all useful responses ****

"Enable Dynamic AP management

gohussai — Mon, 20 Jul 2015 15:31:48 GMT

"Enable Dynamic AP management" and Also mention DHCP Server ip in "Primary DHCP Server"