topic Hi,You need to enable the in Wireless

Remote management (Linksys spa2102)

eclipsemod555 — Mon, 05 Jul 2021 09:36:24 GMT

Hello,
I have Linksys spa2102 (phone adapter with router), and the quastion is how to use remote control.
I know that in wan settings I have to enable "Remote Management" and port, I also choose static ip and wrote it in fields.
As I understand "Remote Management" function allows me to connect to linksys remotely from other place, from other internet.
So, now I know ip and port of linksys, but how to connect? Have I done all preparation for this?
Thank you

You can check the following

gohussai — Thu, 19 Mar 2015 18:44:42 GMT

You can check the following attached guide to do the configuration.

Hi,You need to enable the

abwahid — Thu, 28 May 2015 09:49:57 GMT

Hi,

You need to enable the remote management in your case WAN Web Server of linksys SPA2102 and then to mention the port, by default it is port 80, you may use another not is used port as well, after configuring this.

you need to put you WAN public IP in address bar along with port which you define.

https://WAN_Public_IP:8080