topic Firmware Compatibility in Wireless

Firmware Compatibility

golan.jovani — Mon, 05 Jul 2021 08:54:34 GMT

Hello,

I have a Cisco WLC 2500 series with firmware 7.4.121.0,and AP model AIR-LAP1131AG-E-K9 connected to it .

i want to add one new AP and it's model is AIR-CAP3702I-E-K9 .

I would like to know which firmware version i need to upgrade my WLC so all AP's will be working.

Thanks

adawa — Mon, 10 Nov 2014 18:42:53 GMT

Hello, golvan.jovani.

You need to have at least 7.6.X to support the new Aironet 3702i APs. Check this software compatibility matrix for reference:

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

This should also support 1130 AP models. Are you using other other Cisco AP models?

Let me know if you have additional concerns or e-mail (adawa@cisco.com) me directly. Kind regards.

Rasika Nayanajith — Mon, 10 Nov 2014 22:01:27 GMT

7.6.130.0 is the one you should go for from stability perspective.

Also make sure your FUS upgraded to 1.9.0.0 as well. This is required 30-40min downtime to your wireless & do it via CLI.

HTH

Rasika

*** Pls rate all useful responses ***

Moin Ilyas — Fri, 09 Jan 2015 12:04:10 GMT

Cisco WLC Release	Access Point IOS Release	Supported Access Points
8.0.100.0	15.3(3)JAB /12.4(25e)JAP	Lightweight APs: 1040, 1130, 1140, 1240, 1250, 1260, 1600, 1700, 2600, 2700, 3500e, 3500i, 3500p, 3600e, 3600i, 3600p, 3702e, 3702i, 3702p, 600 OEAP, 700, 700W, AP801, and AP802 Outdoor Mesh APs: 1522, 1524PS, 1524SB, 1532E, 1532I, 1552E, 1552H, 1552I, 1552C, 1552EU, 1552CU, and 1552S
7.6.130.0	15.2(4)JB6/12.4.25e-JAO6	Lightweight APs: 1040, 1130, 1140, 1240, 1250, 1260, 1600, 2600, 2700, 3500e, 3500i, 3500p, 3600e, 3600i, 3600p, 3702e, 3702i, 3702p, 600 OEAP, 700, 700W, AP801, and AP802 Outdoor Mesh APs: 1522, 1524PS, 1524SB, 1532E, 1532I, 1552E, 1552H, 1552I, 1552C, 1552EU, 1552CU, and 1552S
7.6.120.0	15.2(4)JB5/12.4(25e)JAO5
7.6.110.0	15.2(4)JB4/12.4(25e)JAO4	Lightweight APs: 1040, 1130, 1140, 1240, 1250, 1260, 1600, 2600, 3500e, 3500i, 3500p, 3600e, 3600i, 3600p, 3702e, 3702i, 3702p, 600 OEAP, 700, AP801, and AP802 Outdoor Mesh APs: 1522, 1524PS, 1524SB, 1532E, 1532I, 1552E, 1552H, 1552I, 1552C, 1552EU, 1552CU, and 1552S
7.6.100.0	15.2(4)JB3/12.4(25e)JAO3

Cisco WLC Release 7.6.X or higher would work in your case.

Hope that helps.

bsiapco — Thu, 22 Jan 2015 18:21:20 GMT

golan.jovani May I know what happenned with this requirement? If you need further assistance please email me at (bsiapco@cisco.com)

Thanks!

Barry