topic wireless module in Wireless

wireless module

pcfreak49 — Mon, 05 Jul 2021 08:31:41 GMT

I have a problem I get my wireless module is no longer open get just try 10.10.10.1, 2002 ... open does anyone know why?

use the below command and try

Surendra BG — Tue, 16 Sep 2014 02:45:23 GMT

use the below command and try once..

service-module wlan-ap 0 session clear

if this doesnt work then

service-module wlan-ap 0 status

see if the module has any problem..

If nothing works then you have to RMA the box

Hi,Try this commandservice

abwahid — Wed, 19 Nov 2014 14:55:09 GMT

Hi,

Try this command

service-module wlan-ap 0 session

okay I have done and the work

pcfreak49 — Fri, 09 Jan 2015 19:45:05 GMT

I try to leach in to the wireless module through

service-module wlan-ap 0 session
he demand a username and password
give in and be accepted

R2 # service-module wlan-ap 0 statistics

Module Reset Statistics:
CLI reset count = 0
CLI reload count = 0
Registration request timeout resets count = 0
Error recovery timeout resets count = 0
Module registration count = 2

R2 # service-module wlan-ap 0 stat?
statistics status

R2 # service-module wlan-ap 0 status
Service Module Cisco WLAN-AP0
Service Module supports session via TTY line 2
Service Module is in Steady State
Service Module reset on error is disabled
Service Module heartbeat-reset is enabled
Getting status from the Service Module, please wait ..