topic While you can not rename it in Wireless

Wireless SSID's Remaining

sajad majeed — Mon, 05 Jul 2021 07:45:45 GMT

Is possible to rename one currently configured WLAN SSID's

No, You have to delete &

Rasika Nayanajith — Thu, 01 May 2014 20:37:34 GMT

No, You have to delete & recreate with the modified name.

HTH

Rasika

**** Pls rate all useful responses. Each time you rate a response Cisco will donate $1 to Kiva ****

Duplicate post, see

abwahid — Wed, 28 May 2014 10:49:47 GMT

Duplicate post, see below

https://supportforums.cisco.com/discussion/11591596/change-name-ssid-wireless-controller

You have to delete the SSID

Abhishek Abhishek — Thu, 29 May 2014 18:37:45 GMT

You have to delete the SSID and modify it.

While you can not rename it

jmeachum — Fri, 30 May 2014 01:25:36 GMT

While you can not rename it you can delete and recreate it, as others have stated in this post and the one mentioned below.

There is another way not mentioned by others, but this is not the quickest or easiest method either. Transfer the configuration file off of the controller, open it in wordpad, edit the SSID name, and then load the configuration back into the controller.

I hope this helps.

John

Correct................

sajad majeed — Wed, 08 Oct 2014 09:09:31 GMT

Correct................

From WLC code 8.0 onward you

Rasika Nayanajith — Wed, 08 Oct 2014 09:16:42 GMT

From WLC code 8.0 onward you can rename the SSID without deleting it & recreating. Here is the release notes of that code

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn80.html#16248

HTH

Rasika