<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic CLI Commands on WLC in Wireless</title>
    <link>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429606#M176825</link>
    <description>&lt;HTML&gt;&lt;HEAD&gt;&lt;/HEAD&gt;&lt;BODY&gt;&lt;P&gt;Hi John,&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Yes, If you use 0.0.0.0 then it is equivalent to just tick " DHCP address assignment Required" in GUI&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Refer this for more details&lt;/P&gt;&lt;P&gt;&lt;A href="http://mrncciew.com/2013/05/17/wlan-config-via-cli-part-5/"&gt;http://mrncciew.com/2013/05/17/wlan-config-via-cli-part-5/&lt;/A&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;HTH&lt;/P&gt;&lt;P&gt;Rasika&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;*** Pls rate all useful responses ****&lt;/P&gt;&lt;/BODY&gt;&lt;/HTML&gt;</description>
    <pubDate>Wed, 19 Feb 2014 20:05:44 GMT</pubDate>
    <dc:creator>Rasika Nayanajith</dc:creator>
    <dc:date>2014-02-19T20:05:44Z</dc:date>
    <item>
      <title>CLI Commands on WLC</title>
      <link>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429601#M176820</link>
      <description>&lt;P&gt;&lt;SPAN style="font-size: 10pt;"&gt;Does anyone know what the CLI commands are for a WLAN&amp;nbsp; &lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;UL&gt;&lt;LI&gt;&lt;SPAN style="font-size: 10pt;"&gt;DHCP Required&lt;/SPAN&gt;&lt;/LI&gt;&lt;LI&gt;&lt;SPAN style="font-size: 10pt;"&gt;Coverage Hole Detection&lt;/SPAN&gt;&lt;/LI&gt;&lt;LI&gt;&lt;SPAN style="font-size: 10pt;"&gt;CCKM&lt;/SPAN&gt;&lt;/LI&gt;&lt;/UL&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN style="font-size: 10pt;"&gt;I know that "wlan security wpa wpa2 ciphers aes enable 1" enables WPA2/AES, but how do you add CCKM?&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN style="font-size: 10pt;"&gt;Also, does anyone know the PSK command for WPA2 AES? &lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN style="font-size: 10pt;"&gt;Best Regards,&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN style="font-size: 10pt;"&gt;John&lt;/SPAN&gt;&lt;/P&gt;</description>
      <pubDate>Mon, 05 Jul 2021 07:13:31 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429601#M176820</guid>
      <dc:creator>john.rossi.st</dc:creator>
      <dc:date>2021-07-05T07:13:31Z</dc:date>
    </item>
    <item>
      <title>CLI Commands on WLC</title>
      <link>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429602#M176821</link>
      <description>&lt;HTML&gt;&lt;HEAD&gt;&lt;/HEAD&gt;&lt;BODY&gt;&lt;P&gt;config wlan chd &lt;WLAN id=""&gt;&lt;/WLAN&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;config wlan dhcp_server &lt;WLAN id=""&gt; &lt;DHCP server=""&gt; required &lt;/DHCP&gt;&lt;/WLAN&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Thanks, &lt;BR /&gt; &lt;BR /&gt;Scott &lt;BR /&gt; &lt;BR /&gt;*****Help out other by using the rating system and marking answered questions as "Answered"*****&lt;/P&gt;&lt;/BODY&gt;&lt;/HTML&gt;</description>
      <pubDate>Wed, 19 Feb 2014 16:27:43 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429602#M176821</guid>
      <dc:creator>Scott Fella</dc:creator>
      <dc:date>2014-02-19T16:27:43Z</dc:date>
    </item>
    <item>
      <title>CLI Commands on WLC</title>
      <link>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429603#M176822</link>
      <description>&lt;HTML&gt;&lt;HEAD&gt;&lt;/HEAD&gt;&lt;BODY&gt;&lt;P&gt;Try this:&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;config wlan security wpa akm cckm enable &lt;WLAN id=""&gt;&lt;/WLAN&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Thanks, &lt;BR /&gt; &lt;BR /&gt;Scott &lt;BR /&gt; &lt;BR /&gt;*****Help out other by using the rating system and marking answered questions as "Answered"*****&lt;/P&gt;&lt;/BODY&gt;&lt;/HTML&gt;</description>
      <pubDate>Wed, 19 Feb 2014 16:41:20 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429603#M176822</guid>
      <dc:creator>Scott Fella</dc:creator>
      <dc:date>2014-02-19T16:41:20Z</dc:date>
    </item>
    <item>
      <title>CLI Commands on WLC</title>
      <link>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429604#M176823</link>
      <description>&lt;HTML&gt;&lt;HEAD&gt;&lt;/HEAD&gt;&lt;BODY&gt;&lt;P&gt;Hi Scott, &lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;So, if I use the following:&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;wlan dhcp_server 3 0.0.0.0 required&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;It means DHCP Server Required using WLAN 3 and utilizes the DHCP server configured on the interface for the VLAN where the guest users are located? &lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;i.e. &lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;config&amp;gt;wlan dhcp_server 3 ?&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;&lt;IP addr=""&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; Enter the override DHCP server's IP Address (0.0.0.0 = default interface value).&lt;/IP&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Best Regards,&amp;nbsp; &lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;John&lt;/P&gt;&lt;/BODY&gt;&lt;/HTML&gt;</description>
      <pubDate>Wed, 19 Feb 2014 17:53:12 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429604#M176823</guid>
      <dc:creator>john.rossi.st</dc:creator>
      <dc:date>2014-02-19T17:53:12Z</dc:date>
    </item>
    <item>
      <title>CLI Commands on WLC</title>
      <link>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429605#M176824</link>
      <description>&lt;HTML&gt;&lt;HEAD&gt;&lt;/HEAD&gt;&lt;BODY&gt;&lt;P&gt;If you just want to enable DHCP required on the WLAN, then its best to configure that on the GUI.&amp;nbsp; The only way you can configure DHCP required from the CLI is if you specify the DHCP server address.&amp;nbsp; This can be a dhcp server or your guest anchor wlc if that is doing dhcp.&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Thanks, &lt;BR /&gt; &lt;BR /&gt;Scott &lt;BR /&gt; &lt;BR /&gt;*****Help out other by using the rating system and marking answered questions as "Answered"*****&lt;/P&gt;&lt;/BODY&gt;&lt;/HTML&gt;</description>
      <pubDate>Wed, 19 Feb 2014 17:55:43 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429605#M176824</guid>
      <dc:creator>Scott Fella</dc:creator>
      <dc:date>2014-02-19T17:55:43Z</dc:date>
    </item>
    <item>
      <title>CLI Commands on WLC</title>
      <link>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429606#M176825</link>
      <description>&lt;HTML&gt;&lt;HEAD&gt;&lt;/HEAD&gt;&lt;BODY&gt;&lt;P&gt;Hi John,&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Yes, If you use 0.0.0.0 then it is equivalent to just tick " DHCP address assignment Required" in GUI&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Refer this for more details&lt;/P&gt;&lt;P&gt;&lt;A href="http://mrncciew.com/2013/05/17/wlan-config-via-cli-part-5/"&gt;http://mrncciew.com/2013/05/17/wlan-config-via-cli-part-5/&lt;/A&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;HTH&lt;/P&gt;&lt;P&gt;Rasika&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;*** Pls rate all useful responses ****&lt;/P&gt;&lt;/BODY&gt;&lt;/HTML&gt;</description>
      <pubDate>Wed, 19 Feb 2014 20:05:44 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/cli-commands-on-wlc/m-p/2429606#M176825</guid>
      <dc:creator>Rasika Nayanajith</dc:creator>
      <dc:date>2014-02-19T20:05:44Z</dc:date>
    </item>
  </channel>
</rss>

