Another Bonjour issue

Claudio Motta — Sun, 04 Jul 2021 08:07:17 GMT

Hi all,

I need hel pin configuring Bonjour on a 2504 controller with 7.5.102.0 fw.

The controller is connected to a 2960S switch with 15.0(1)SE2.

The antennas, all AIR-LAP1242AG-E-K9, are connected to this and other 2960 (same sw).

I followed step by step this documents:

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0080bb1d7c.shtml (only multicast-muticast suported by my Wlc)

http://www.cisco.com/en/US/docs/wireless/technology/bonjour/Bonjour_Deployment.html

But without success.

Now i'm fighting with the manager that says that is impossible that on his home 30$ access point works and on our net not... you can immagine

Thank you,

Claudio

Another Bonjour issue

Rasika Nayanajith — Fri, 25 Oct 2013 21:46:14 GMT

Since you are usng WLC 7.5.102.0 firmware here is most upto date deployment guide for this feature. Hope it is useful.

http://www.cisco.com/en/US/docs/wireless/technology/bonjour/7.5/Bonjour_Gateway_Phase-2_WLC_software_release_7.5.html

Regarding the last comment, Apple introduced this for home/consumer environment where you will work with single vlan (or unmanaged home grade switch) using link local multicast feature (mDNS). Since then users demanding to bring those sort of thing into enterprise environment (consist of multiple l3, restrictive, etc) and all wireless vendors try to support it & it is not straight forward as of home environment. That's why even Cisco improving this feature satring from 7.3, 7.4 & 7.5 codes, still may not perfect how you want it.

HTH

Rasika

**** Pls rate all useful responses ****

topic Another Bonjour issue in Wireless

Another Bonjour issue

Another Bonjour issue