topic Re: why all accesspoints not operational? in Wireless https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275052#M178322 <HTML><HEAD></HEAD><BODY><P>Pfff, I found it. When I first booted the wlc, I quickly went through the initial wizard and disabled the radio's. I only needed webgui access. Then I uploaded a config file. But... the radio's were still disabled.</P><P>NOw it is working, duh...</P><P></P><P>Thanks for thinking ,</P><P></P><P>Kind regards,</P><P>Ralph</P></BODY></HTML> Sat, 22 Jun 2013 15:12:23 GMT erwee1973 2013-06-22T15:12:23Z why all accesspoints not operational? https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275048#M178318 <P>Hello,</P><P>I am configuring a 2504 wireless controller with 10 LAP1042 AP's (license accepts 15 AP's)</P><P>Everything seems to be configured fine, however, no wlan in visisble and I noticed that, while the admin status of the Radio's is set to enabled, the Operational status stays DOWN. Never had this before and googling didn't make me any wiser.</P><P></P><P>Does any has an idea why it is nog working?</P><P>Software version is 7.0.220</P><P></P><P>Kind regards,</P><P>Ralph Willemsen</P><P>Arnhem, Netherlands</P> Sun, 04 Jul 2021 07:16:27 GMT https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275048#M178318 erwee1973 2021-07-04T07:16:27Z Re: why all accesspoints not operational? https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275049#M178319 <HTML><HEAD></HEAD><BODY><P>When you are on the wireless tab in the GUI, click on an access point and set the AP status to disable and hit apply and then back to enable and hit apply. See if that works.<BR /><BR />Sent from Cisco Technical Support iPhone App</P></BODY></HTML> Sat, 22 Jun 2013 14:34:01 GMT https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275049#M178319 Scott Fella 2013-06-22T14:34:01Z Re: why all accesspoints not operational? https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275050#M178320 <HTML><HEAD></HEAD><BODY><P>Hello Scott, thank you for your quick reply. Unfortunately this didn't do the trick.</P><P>I rebooted the whole system, including APs (remotely) and still not working <SPAN __jive_emoticon_name="sad" __jive_macro_name="emoticon" class="jive_macro jive_emote" src="https://community.cisco.com/4.5.4/images/tiny_mce3/plugins/jiveemoticons/images/spacer.gif"></SPAN></P></BODY></HTML> Sat, 22 Jun 2013 14:47:33 GMT https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275050#M178320 erwee1973 2013-06-22T14:47:33Z Re: why all accesspoints not operational? https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275051#M178321 <HTML><HEAD></HEAD><BODY><P>Can you post the output from the APs console? Start the output from when you recycle the AP.<BR /><BR />Also make sure that the AP's country code is also configured on the WLC.<BR /><BR />Sent from Cisco Technical Support iPhone App</P></BODY></HTML> Sat, 22 Jun 2013 15:01:31 GMT https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275051#M178321 Scott Fella 2013-06-22T15:01:31Z Re: why all accesspoints not operational? https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275052#M178322 <HTML><HEAD></HEAD><BODY><P>Pfff, I found it. When I first booted the wlc, I quickly went through the initial wizard and disabled the radio's. I only needed webgui access. Then I uploaded a config file. But... the radio's were still disabled.</P><P>NOw it is working, duh...</P><P></P><P>Thanks for thinking ,</P><P></P><P>Kind regards,</P><P>Ralph</P></BODY></HTML> Sat, 22 Jun 2013 15:12:23 GMT https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275052#M178322 erwee1973 2013-06-22T15:12:23Z Re: why all accesspoints not operational? https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275053#M178323 <HTML><HEAD></HEAD><BODY><P>Yeah it usually one if those things and the output from the AP would of showed that. At least you got it working.<BR /><BR />Sent from Cisco Technical Support iPhone App</P></BODY></HTML> Sat, 22 Jun 2013 15:14:19 GMT https://community.cisco.com/t5/wireless/why-all-accesspoints-not-operational/m-p/2275053#M178323 Scott Fella 2013-06-22T15:14:19Z