topic WLC2106 upgrade in Wireless

WLC2106 upgrade

Geminorum_cco — Sun, 04 Jul 2021 07:13:28 GMT

Hi everybody

As always, thanks for this awesome ressource!

I have two AIR-WLC2106-K9s that i would like to upgrade, their current software v4.0.206.0... And i've been looking at the upgrade compatibility matrix. From that i can see that i would have to go through this upgrade path to get to v7:

4.0.206.0 --> 4.1.185.0 --> 4.1.191.24M --> 4.1.192.35M --> 5.2.157.0 --> 7.0.240.0

What do you guys think, is there another way. There are ofcourse APs to take into account - they would have to upgrade along the way as well. I started thinking that maybe this upgrade path was layed out to preserve the config along the way. And that maybe i could go for v7 at once and just reconfigure?

Thanks in advance.

Cheers

WLC2106 upgrade

Leo Laohoo — Thu, 13 Jun 2013 06:24:19 GMT

To minmize chaos to your AP, disable the AP Management interface via the "allowed vlan" of your interface then do the upgrade.

Re: WLC2106 upgrade

Geminorum_cco — Thu, 13 Jun 2013 06:44:58 GMT

Hi Leo

So what you are saying is that i should deafen my APs while i go through the entire upgrade path? Or could i install v7 right away? I noticed that it isnt possible to download versions 4.1.191.24M and 4.1.192.35M. That could present a problem. Does anyone know how to go about upgrading past v4?

Cheers

WLC2106 upgrade

Leo Laohoo — Thu, 13 Jun 2013 09:30:42 GMT

So what you are saying is that i should deafen my APs while i go through the entire upgrade path?

That's correct.

Or could i install v7 right away?

From version 4.0.X? That's not possible.

Does anyone know how to go about upgrading past v4?

The release notes have a matrix or an upgrade path. Follow that and it will work.

WLC2106 upgrade

Scott Fella — Thu, 13 Jun 2013 12:38:46 GMT

Wow... you have a lot of work a head of you... here is what I would do.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

WLC2106 upgrade

Geminorum_cco — Thu, 13 Jun 2013 12:48:46 GMT

Hi Leo and Scott

I had an extra look at the release notes, and it turns out i read it wrong. I was looking at it from a Wireless Mesh standpoint, however i've got a regular non-mesh infrastructure.

And as far as i can see this is my upgrade path:

4.0.206.0 --> 4.2.176.0 --> 7.0.240.0

Atleast when i read the section "Special Rules for Upgrading to Controller Software Release 7.0.240.0" in the document:

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_240_0.html#wp784198

I dear bet thats correct or i might as well buy a couple off of ebay with a newer version software.

Can you guys confirm this?

Cheers

Re: WLC2106 upgrade

Scott Fella — Thu, 13 Jun 2013 12:56:59 GMT

That is correct. For non mesh you look at table 1-1

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_240_0.html#wp784219

Sent from Cisco Technical Support iPhone App

Re: WLC2106 upgrade

Geminorum_cco — Thu, 13 Jun 2013 13:05:57 GMT

Yeah. I knew better than to research this at 8pm going on my 100th cup of coffee.

You guys are the best. Thanks for helping out.